Skookum Robotics SK-720 with SK-PB1 Power Bus 20A regulator.
$265 (firm) for both shipped to ConUS. Sold only as a set.
Retail $399 for SK-720, $25 for SK-PB1
SK-720 vibration isolation plate
SK-720 to SK-PB1 hookup cables
USB computer cable
This is a 6-axis flybarless controller that works on all swashplate setups including quad-copters.
It has a input for a GPS receiver (not included), self leveling (like a coaxial / counter-rotor heli) at signal loss or push-button on your TX (bail out), input for governor and free vibration analyzer software.
Supports many input options: Spektrum/JR Satellites (DSM2 and DSMx), Futaba S-Bus, Futaba PPM, Jeti PPM, Graupner JR, and your old traditional receiver.NOTE:
The SK-720 has a minor stress crack in the corner of the case (see picture). This was not from a crash. It is a plastic case and I assume it stress cracked while handling it.
Includes the latest software (3.15) already loaded
Much more details on the web: SK-720
The web site has all the details on the abilities of this system
The SK-720 replaces the tail gyro, mechanical flybar, and receiver on your R/C Helicopter. Other features include flight logging with playback, optional-self leveling, and more to come!
This unit is ideal for pilots from beginner to 3D expert. Go flybarless!
High power servos draw a lot of current - a set of four 8717 servos can often be pull 12 amps! The SK-PB1 Power Bus was designed for up to 20 Amps of continuous current, and helps isolate the SK-720 from vibration.
Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!