RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1161 views POST REPLY
06-09-2012 03:42 PM  5 years agoPost 1
sjferrozzo

rrApprentice

minnesota

My Posts: All  Forum  Topic

i have a bk117 petro mech/ vbar controls with a 3 swash .. wounder what the head speed should be.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2012 04:47 PM  5 years agoPost 2
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

Need Little More Info..
What head are you running and do you mean that you have a 3 bladed head?? (3 swash???)
What blades and what length??

Stan

AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2012 05:09 PM  5 years agoPost 3
sjferrozzo

rrApprentice

minnesota

My Posts: All  Forum  Topic

3
3 servo swach
4blade head from vario 12 mm

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2012 05:27 PM  5 years agoPost 4
doorman

rrProfessor

Sherwood, Arkansas

My Posts: All  Forum  Topic

OK
With the Vario heads, if you are running 800mm blades the hs should not exceed 1250.. I like mine at 1175...
If you are running 700mm blades you can go up to about 1400...

So one of the above should get you in the air, and then I like to reduce the speed of mine until it starts feeling a little mushy and then I add about 50rpm at a time until it feels that I have good control... I like to run the lowest hs I can.. the slower the better for realizm!!!

Hope this helps you out... Stan

AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft

PM  EMAIL  GALLERY  Attn:RR  Quote
06-09-2012 05:41 PM  5 years agoPost 5
sjferrozzo

rrApprentice

minnesota

My Posts: All  Forum  Topic

thank you
Very much

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1161 views POST REPLY
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, May 21 - 10:14 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online