RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 750 views POST REPLY
Helicopter
e-
Electric General Discussion
› swash mix / reversing
02-05-2012 08:37 PM  6 years agoPost 1
jason46

rrVeteran

MI

My Posts: All  Forum  Topic

I recently received a receiver back from service and the reversing in some channels is now different, I'm assuming firmware change. Anyways, I can't come up with the right combination of movement between collective and aileron/elevator movement. I'm fairly certain i've tried every combination of +- swash mix and reversing, twice. I'm considering swapping the aileron and elevator servo plugs on the receiver, is that a possible solution?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-05-2012 08:40 PM  6 years agoPost 2
DemetriusUSN

rrVeteran

Virginia Beach, Va USA

My Posts: All  Forum  Topic

Some times that will work,I've done on a couple of mine and it worked out. Give it a shot,it won' t hurt anything.

Minicopter Triabolo 700,Diabolo 800,Minicopter Diabolo 700, Minicopter 550,Compass 6hvu, Devil 380

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-05-2012 08:52 PM  6 years agoPost 3
Al Austria

rrElite Veteran

Gainesville, FL

My Posts: All  Forum  Topic

Reverse which ever servo is not moving the same direction as the other two so that they all move the same direction(swash moves straight up or down) upon a collective input. Right now, the direction the swash moves is not important, as long as it moves straight up and down with a collective input.

Now if any of your control functions(collective, elevator, aileron) are backwards, you reverse them by simply changing the sign(+ to - or vis versa) of the swash mix value for that particular function. Done.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-05-2012 09:04 PM  6 years agoPost 4
spiderco

rrVeteran

Henderson, Nevada

My Posts: All  Forum  Topic

Which ones are reversed the way it sits right now? We should be able to tell you which servo to reverse and which swash mix to -/+. You don't need to swap the plugs.

fly til its dry

PM  EMAIL  GALLERY  Attn:RR  Quote
02-05-2012 09:38 PM  6 years agoPost 5
jason46

rrVeteran

MI

My Posts: All  Forum  Topic

Previously either the collective would be right and the aileron and elevator would be backwards. With the aileron/elevator correct the collective would be backwards. With the servo plugs swapped I was able to get everything correct, and it flies! The receiver is an old AR7000, apparently the receiver label can't be correct for all types of servo/swash combinations.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-05-2012 09:43 PM  6 years agoPost 6
spiderco

rrVeteran

Henderson, Nevada

My Posts: All  Forum  Topic

Glad you figured it out.

fly til its dry

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 750 views POST REPLY
Helicopter
e-
Electric General Discussion
› swash mix / reversing
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, May 25 - 6:25 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online