RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1150 views POST REPLY
Helicopter
e-
Align
T-REX 450 › 450 Pro to V2 Pro conversion question
02-03-2012 02:56 AM  6 years agoPost 1
BlakeMcBrayer

rrElite Veteran

Georgetown, Ky

My Posts: All  Forum  Topic

I'm getting ready to convert my 450 Pro(V1) to 3GX FBL. I'm wanting to use the V2 side frames, 3GX mounting plate and V2 bottom plate.

Is there anything else that HAS to be changed in order to use these V2 parts on my 450 Pro(V1)?

THANKS

Don't come off the throttle untill you see your GOD!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2012 08:35 AM  6 years agoPost 2
rocco.sj

rrVeteran

California,

My Posts: All  Forum  Topic

@BlakeMcbrayer that is a good question you brought that up regarding the frames therefore i am also confused about the pro V1,V2 and the recently newest V2 pro frames?. Is there supposed to be something in the middle for the newest v2 frames?? I am lost maybe someone out there that has the newest v2 kit might chime in.

JR Americas
Evo Power Battery
Radio Frequency RC

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2012 01:29 PM  6 years agoPost 3
Furyous

rrVeteran

Detroit, Michigan

My Posts: All  Forum  Topic

The new frames have a different battery holder and a small mounting tray in between the frames near the bottom. Not sure the conversion is worth it. That lower mounting tray is so small, it is almost not usable.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-03-2012 09:22 PM  6 years agoPost 4
BlakeMcBrayer

rrElite Veteran

Georgetown, Ky

My Posts: All  Forum  Topic

My intrest in the new frames, bottom plate and tray is because they have holes in them for the 3GX. These allow you to put the 3GX upside down on the bottom of the new tray and get to all adjustments and plugs.

My question is will the V2 frames, bottom plate and tray work with the V1 parts that I don't want to change. Parts like the battery tray and anti-rotation bracket.

Don't come off the throttle untill you see your GOD!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2012 01:09 AM  6 years agoPost 5
BlakeMcBrayer

rrElite Veteran

Georgetown, Ky

My Posts: All  Forum  Topic

The V2 side frames, bottom plate and gyro mount are all a direct fit without changing to the other V@ parts. The only difference is that the V2 frames have one less screw hole to attach to the battery tray. I figured if one less was good enough for V2 frames and tray, then it would never be missed in my V1 tray.

Blake McBrayer

Don't come off the throttle untill you see your GOD!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-25-2012 03:06 PM  6 years agoPost 6
400 flyer

rrApprentice

maryland, usa

My Posts: All  Forum  Topic

thanks for posting your findings. i was thinking of changeing over myself just was not sure if they would bolt up. thanks again.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1150 views POST REPLY
Helicopter
e-
Align
T-REX 450 › 450 Pro to V2 Pro conversion question
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, May 20 - 3:11 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online