RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 1661 views POST REPLY
Helicopter
e-
Synergy R/C
Synergy E6 › <<E6>> What setup are you running???
01-28-2012 05:01 AM  6 years agoPost 1
cJ

rrVeteran

Medford OR

My Posts: All  Forum  Topic

What setup are you running??

Motor? KV??
battery size, C-rating,10s,12s?
Flight time? (how much are you putting back into your batteries)
Headspeed?
Controller?
Blades?

How is it working so far?

thanks,
cJ

PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2012 08:58 AM  6 years agoPost 2
RotorHead486

rrKey Veteran

England

My Posts: All  Forum  Topic

Hi CJ,

I am currently running my E7 in E6 Configuration, here is my current setup:

Configuration: E6
Flight Style: Smooth 3D
FBL System: Futaba CGY750
Motor: Hacker Turnado 580kv
Pinion: 15T
Target Headspeed(s): 2000/2300
ESC: Castle Creations ICE2 HV120
Governor: Castle ICE
BEC: Flighttech 8a Regualtor @ 6V
RX Pack: Optipower 2150 2S 7.4V
Cyclic Servos: Futaba BLS451
Tail Servo: Futaba BLS251
Main Blades: Rail 606
Tail Blades: Rail 96
Lipos: 2x Optipower 5S 4300mAh (10S)

One Reason For Crashing'Rogue Servo Bent on World Domination'!!
FLP Flight Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-28-2012 01:53 PM  6 years agoPost 3
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

Mine flies great, love it just a much as my E7.

My E6 has the following set-up:

Hacker 470Kv motor, 14 tooth pinion
Jive 80HV ESC
Bls 451 on cyclic
Bls 251 on tail
V-Bar 5.2 pro
Futaba HS receiver
running Gens Ace 12S 4000mah
Of course Rail 96mm tails and Rail 606 Mains
Rest is stock, don't need upgrades with Synergy products.

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-28-2012 03:07 PM  6 years agoPost 4
bkervaski

rrElite Veteran

Birmingham, AL, USA

My Posts: All  Forum  Topic

KDE 495
15T (~2300)
Castle Creations 120 ICE2
12S
Thunder Power 65C 3850s
Futaba BLS255HV/256HV
Futaba CGY750 1.2
Rail 606/106

Team Synergy Factory Specialist / Scorpion / Thunder Power / Byron's Fuels

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-28-2012 03:54 PM  6 years agoPost 5
Darren Lee

rrElite Veteran

Woodstock, GA

My Posts: All  Forum  Topic

Hacker Turnado 470kv
15T (2300)
Castle Creations 120 ICE2
12S Gens Ace 25C 4000s
Futaba BLS252/BLS251
Vbar 5.2 Pro
Rail 606/106

Flight style: smack/aggressive/fast
Flight time: 4:30 (70-80% capacity used)

Team Synergy / Rail Blades / Morgan Fuel

PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2012 07:09 PM  6 years agoPost 6
cJ

rrVeteran

Medford OR

My Posts: All  Forum  Topic

Flight times??
type of flying??

cJ

PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2012 07:21 PM  6 years agoPost 7
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

Sorry I forgot to say about my flight time. On my E6 with the set up I said previously and my flying style I get 7 minutes to use up around 80% of my pack.

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-28-2012 08:47 PM  6 years agoPost 8
ben_beyer

rrApprentice

Canyon, TX

My Posts: All  Forum  Topic

Weight?

PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2012 10:27 PM  6 years agoPost 9
4cyclic

rrKey Veteran

Montreal, Can. and northern Vermont

My Posts: All  Forum  Topic

Configuration: E6
Flight Style: hard 3D
FBL System: mini blue V-bar
Motor: Hacker Turnado 470kv
Pinion: 14T
Target Headspeed(s): 2300
ESC: Jive 80HV
Governor: Jive
BEC: Jive
RX Pack: na
Cyclic Servos: Futaba BLS451
Tail Servo: Futaba BLS251
Main Blades: Rail 606
Tail Blades: Rail 96
Lipos: 2x 3300 and 4000's Gens Ace

Running time: 4:15 on 3300, 5:15 on 4000's

Life is meaningful flying helis.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2012 11:41 PM  6 years agoPost 10
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

ben_beyer my E6 is just under 9 and half pounds.

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-29-2012 12:15 AM  6 years agoPost 11
ben_beyer

rrApprentice

Canyon, TX

My Posts: All  Forum  Topic

ben_beyer my E6 is just under 9 and half pounds.
That's not bad for as heavy as those batteries are.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 02:44 AM  6 years agoPost 12
cJ

rrVeteran

Medford OR

My Posts: All  Forum  Topic

this is perfect.. keep the data coming..

thanks all,

cJ

PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2012 10:12 PM  6 years agoPost 13
bmw576

rrKey Veteran

Traverse city MI USA

My Posts: All  Forum  Topic

Configuration: E6
FBL System: mini blue V-bar
Motor: Hacker Turnado 580KV
Pinion: 14T
Target Headspeed(s): 2300
ESC: Hacker X80
Governor: V-bar
BEC: Western Robotics Hercules
RX Pack: na
Cyclic Servos: Futaba BLS451
Tail Servo: Futaba BLS251
Main Blades: Rail 606
Tail Blades: Rail 96
10s
Thunder power 4400mm 65c

Team Synergy, Synergy E5, E7, E9, N5c and N7

PM  EMAIL  GALLERY  Attn:RR  Quote
01-30-2012 05:48 AM  6 years agoPost 14
cJ

rrVeteran

Medford OR

My Posts: All  Forum  Topic

Motor: Hacker A50 12L 470kv
Battery: TP 65c 3850
Headspeed: 22-2300
controller: cc120hv(v2)
fbl: Futaba CGY750
Blades: Rail 606/96
servos swash: BLS451's
Tail servo: BLS251
Flying Style: smooth/hard 3D
BEC: Western Robotics Hercules
12s config 15t pinion

Can't wait to get it in the air.

cJ

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1661 views POST REPLY
Helicopter
e-
Synergy R/C
Synergy E6 › <<E6>> What setup are you running???
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, May 22 - 7:21 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online