RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 1938 views POST REPLY
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Mikado Vbar for CCPM 140 Deg.
01-25-2012 11:45 PM  6 years agoPost 1
Egroeg

rrApprentice

Cyprus

My Posts: All  Forum  Topic

Dear RRiders, how does one adjust the blue line 5.2 ver for 140 ccpm?
I have experimented so far on the bench...I have altered the angles of the left and right servos.
The degrees were 150...30...270 I believe.
I have set them to 140 40 270 I think.
Cannot remember for sure.
Will check tomorrow and correct my post .
But I wish to confirm that this is the proper way to go about it.
Many thanks G.

No Pitch...No Fun!

PM  EMAIL  Attn:RR  Quote
01-26-2012 04:56 AM  6 years agoPost 2
Gorgin4325

rrKey Veteran

Florida

My Posts: All  Forum  Topic

Hi,

The 3 numbers are odd numbers. I will check when I get home.

Cheers

PM  EMAIL  GALLERY  Attn:RR  Quote
01-26-2012 05:08 AM  6 years agoPost 3
Gorgin4325

rrKey Veteran

Florida

My Posts: All  Forum  Topic

Here you go. This will be as close to 140 as you can get on the Vibe SG.

Regards,
G

PM  EMAIL  GALLERY  Attn:RR  Quote
01-26-2012 06:41 AM  6 years agoPost 4
Egroeg

rrApprentice

Cyprus

My Posts: All  Forum  Topic

(shukran...shukran awi...)
Ill put the settings in...it will save me messing around trying to figure that out.
And in your honest opinion...
Is it best this way with swash to 140 ccpm?
Or with the 120 ccpm...like any other 120 ccpm with the 120 hardware ?

No Pitch...No Fun!

PM  EMAIL  Attn:RR  Quote
01-26-2012 09:46 AM  6 years agoPost 5
Gorgin4325

rrKey Veteran

Florida

My Posts: All  Forum  Topic

If a heli is capable, i would always go with 140. Although with today's digital servos it doesn't make a massive difference, but i still prefer 140. I like the fact that the servos all move the same distance to achieve full travel on the swash.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-04-2012 10:36 PM  6 years agoPost 6
Egroeg

rrApprentice

Cyprus

My Posts: All  Forum  Topic

Maidened the JR Vibe 90 SG fbl...
Very sweet...very stable...wonderfully machine.
Only after 4th flight had an issue when the fan hub let go of the motor output shaft...
I had not tightened the engine output shaft nut hard enough so the hub was slipping.
Fixed it all up and locktighted the nut even more this time.
Going to run the piro optimiser and cyclic optimiser tomorrow to get best results...

No Pitch...No Fun!

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1938 views POST REPLY
HelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Mikado Vbar for CCPM 140 Deg.
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, May 21 - 10:11 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online