RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 876 views POST REPLY
HelicopterRadio - Spektrum DSM › Need wiring help: BeastX - AR7100R - JR8900G
01-24-2012 05:02 PM  6 years agoPost 1
rudyy

rrElite Veteran

E. Amherst, NY

My Posts: All  Forum  Topic

I have the BeastX, AR7100R and JR8900G. My rx battery is 6.6V LiFe. How do I do the wiring such the I can make use of the AR7100R internal step down to bring the JR8900G tail servo voltage to 5.2v?

Rudy

PM  EMAIL  GALLERY  Attn:RR  Quote
01-24-2012 05:32 PM  6 years agoPost 2
rudyy

rrElite Veteran

E. Amherst, NY

My Posts: All  Forum  Topic

I split the J8900G servo lead. The signal wire goes to the ch4 on BeastX and the +ve and -ve wires go to the rudder channel on AR7100R.

Would that work?

PM  EMAIL  GALLERY  Attn:RR  Quote
01-24-2012 11:10 PM  6 years agoPost 3
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

Change to LiPo and use the Perfect Regulators Spekline 6v/6.5v regulator.

It might have low enough overhead to allow a LiFe battery, but it works best with a LiPo

It plugs into the main leads on the AR7100R and battery. No hacking required.

It provides 6v or 6.5v (switch selectable) on the unregulated servo leads and 5.2v on the regulated outputs (throttle, gyro and gyro gain).
It delivers 10amp continuous and up to 16amp peak. It is pre-wired with Dean's connectors.

I use it. It has been solid as a rock.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-25-2012 12:00 AM  6 years agoPost 4
mylee

rrVeteran

Rochester, UK

My Posts: All  Forum  Topic

+1 Rudyy. I fly 3 heli's like this with no issues at all. All running LiFe's

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 876 views POST REPLY
HelicopterRadio - Spektrum DSM › Need wiring help: BeastX - AR7100R - JR8900G
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, May 24 - 10:46 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online