RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 484 views
Scorpion Power Scorpion Power
HelicopterMain Discussion › Thunder Power 1010c and 210v balancer
12-17-2011 05:11 PM  5 years agoPost 1
ssrobzoom

rrKey Veteran

Tn

My Posts: All  Forum  Topic

Im using the TP 1010c and 210v balancer, how do you balanced a 6s and above lipo with a balance plug?
The 210v only takes directly up to a 5s plug to plug the battery direct into the 210.

Do you use an adapter or something? If so, where can I get the proper adapter?

PM  EMAIL  GALLERY  Attn:RR  Quote
12-17-2011 05:55 PM  5 years agoPost 2
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

Can't remember for sure (I used to have the same combo) but you have to connect the two balance leads from the battery, to bank 1, one plug on group A, one plug on Group B. That's the bummer about TP/FP 6S packs, the two leads.

See here: http://thunderpowerrc.com/PDF/quick-start-tp210v.pdf

and here: http://thunderpowerrc.com/PDF/TP210V%20Manual.pdf

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
12-18-2011 01:33 AM  5 years agoPost 3
TheWoodCrafter

rrKey Veteran

Costa Mesa, Ca.

My Posts: All  Forum  Topic

Above 5S Thunder Power uses 2 plugs.
A 6S uses 4 wire and a 6 wire.
Depending on the battery depends on how many of these wires are used.
I think this is good up to 8S.
Plug these into Banks 1 on your TP-210.
Above that, 2 - 7 pin plugs are used.
I think this is for 10S and 12S.
Plug these into Bank 2.
NEVER have something plugged into both banks at the same time.

Thanks, TheWoodCrafter

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 484 views
Scorpion Power Scorpion Power
HelicopterMain Discussion › Thunder Power 1010c and 210v balancer
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, November 25 - 9:35 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online