RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 1451 views POST REPLY
Scorpion Power Scorpion Power
HelicopterNext D Rave-ENV-700 › ENV with OS 105
12-17-2011 03:54 AM  5 years agoPost 1
gotnoclue

rrApprentice

sydney

My Posts: All  Forum  Topic

just fitted up my new OS 105 to my env, looks excellent so far.
only issue is the fan shroud needs to be modded to fit the velocity stack onto the carb, opening needs to be raised and made widder to suit, dremmel make short work of it.

will report back once i get a few flights on it

PM  EMAIL  GALLERY  Attn:RR
12-17-2011 02:20 PM  5 years agoPost 2
P Johnston

rrVeteran

Ann Arbor MI

My Posts: All  Forum  Topic

Looking forward to a report! You get the power boost pipe too?

PM  EMAIL  GALLERY  Attn:RR
12-17-2011 06:21 PM  5 years agoPost 3
gotnoclue

rrApprentice

sydney

My Posts: All  Forum  Topic

No I have gone with the hatori 105

PM  EMAIL  GALLERY  Attn:RR
12-17-2011 08:32 PM  5 years agoPost 4
gotnoclue

rrApprentice

sydney

My Posts: All  Forum  Topic

got my new 10 hz-r with hatori 105 pipe delivered yesterday, after spending the afternoon getting it installed/modding fan shroud and then doing family stuff i had no time for a maiden well it did have a short hover in the backyard
i have used a second 2mm shim in the head as i intend to use 30%, it comes with a 1mm shim as well spare along with a 2mm preinstalled, the manual recommends the 2 2mm shims for 30%

well off to the local park at 5:30 this morning for break in flights, first 2 just running off throttle curves, around about 1650-1700 head speed, nothing eventful, got around about 8 minutes per each tank.

3rd flight flicked into idle up 1 with gentle circuits, light climbouts and a few flips on rolls, motor did not hesitate one bit, already its more powerful than my old 91HZ-r

4th flight idle up 1 again 1980 head speed, started getting into it more, tictocs, climbouts, rainbows, holy crap! this motor is a monster, did not even show signs of loading up one bit just pulled through everything and the needles are still on breakin settings. got nearly 8 minutes for each flight

cant wait to get it out and get more flights on it and really see what it has but so far im incredibly happy

PM  EMAIL  GALLERY  Attn:RR
12-18-2011 09:07 AM  5 years agoPost 5
gotnoclue

rrApprentice

sydney

My Posts: All  Forum  Topic

Note on the shimming it should be .2mm not 2mm

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 1451 views POST REPLY
Scorpion Power Scorpion Power
HelicopterNext D Rave-ENV-700 › ENV with OS 105
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, September 25 - 7:10 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online