RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 740 views
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › Any problems that need to be addressed
12-16-2011 10:32 PM  5 years agoPost 1
JeffKollin

rrKey Veteran

Jenison, MI

My Posts: All  Forum  Topic

Any problems that need to be addressed during assembly of an X50TT version. Other than the normal loc-tite of the screws and greasing of the bearings. Has anybody had any failures that needed updates of parts or is it just put together and no need to worry other than routine preflights.

PM  EMAIL  GALLERY  Attn:RR
12-17-2011 06:05 AM  5 years agoPost 2
johnbs8

rrKey Veteran

roseville michigan

My Posts: All  Forum  Topic

so far my TT build was pretty solid eccept i had a bad oneway clutch housing. the holes were drilled off center of eachother. i added the 2 shims for the tail gear-b and added the shim for the tail output gear. These X50's are solid and need no updates that i know of.
my X50 B kit has been rock solid from the day it left the ground until it met again in a hard slam. rebuilt and like new again rock solid with no maintenance since accept belt adjustments...

TT X50 Nitro
Warp 360
Logo 550sx
TeaM KicKnWinG

PM  EMAIL  GALLERY  Attn:RR
12-17-2011 02:12 PM  5 years agoPost 3
Rob43

rrKey Veteran

Midland, MI USA

My Posts: All  Forum  Topic

What sensor are you guys using for govenor?

Rob

PM  EMAIL  Attn:RR
12-17-2011 05:05 PM  5 years agoPost 4
johnbs8

rrKey Veteran

roseville michigan

My Posts: All  Forum  Topic

I use the spectrum backplate sensor withar7100r and beastx on B kit. Gonna use the new spectrum beast and align gov on the TT kit

TT X50 Nitro
Warp 360
Logo 550sx
TeaM KicKnWinG

PM  EMAIL  GALLERY  Attn:RR
12-19-2011 12:01 AM  5 years agoPost 5
Rob43

rrKey Veteran

Midland, MI USA

My Posts: All  Forum  Topic

I just aquired a third V-Bar and will plan to use the included governor. I am torn on the backplate sensor. I ran one on my Fury 55 previously, and it was a little tricky to get into position using the different brackets I tried (Spektrum, Spektrum HD, KDE, and AlumaFX). None fit like I thought they should. Which bracket are you using?

Rob

PM  EMAIL  Attn:RR
12-19-2011 01:14 AM  5 years agoPost 6
johnbs8

rrKey Veteran

roseville michigan

My Posts: All  Forum  Topic

I use the HD spektrum backplate sensor bracket.i was told but havnt researched it any that you could take the align sensor and reverse the two wires and install it in the spektrum HD bracket. anyone know about that? BTW the HD braket fit perfect in my ys56 backplate.

TT X50 Nitro
Warp 360
Logo 550sx
TeaM KicKnWinG

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 740 views
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 50 › Any problems that need to be addressed
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, November 20 - 2:05 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online