RunRyder RC
 10  Topic Subscribe
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2506 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsBeastX › Beastx...slow aileron
12-16-2011 03:09 PM  5 years agoPost 1
VANHELI

rrVeteran

Omaha,Nebraska

My Posts: All  Forum  Topic

This is my first beastx and have it installed on a gaui x2. My issue is the aileron is too slow for my liking. I have the control behavior set to extreme and the elevator is perfect but the aileron is much slower??? Any ideas why there would be such a difference in the cyclic control? Thanks in advance!

Dave V.

Dave V.

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 05:10 PM  5 years agoPost 2
blackbird

rrVeteran

thessaloniki-Greece

My Posts: All  Forum  Topic

Put the v3.0.8 and see if this solve the problem.

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 05:21 PM  5 years agoPost 3
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

what are your end points and dual rates on those channels?

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 05:34 PM  5 years agoPost 4
VANHELI

rrVeteran

Omaha,Nebraska

My Posts: All  Forum  Topic

I havent touched any settings in the radio...someone else posted in another thread to change the control behavior to transmitter and then adjust endpoints. I will try that next time i get a chance to fly it. I just thought using a predetermined control behavior "extreme", the elevator and aileron should be of equal speed?? I have the swash, set in the beast setup, for full deflection without binding.

Dave V.

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 06:17 PM  5 years agoPost 5
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

I use extreme.
And I use 120% D/R on aileron and elevator

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 06:47 PM  5 years agoPost 6
VANHELI

rrVeteran

Omaha,Nebraska

My Posts: All  Forum  Topic

Thanks for the info...i will try that.

Dave V.

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 07:09 PM  5 years agoPost 7
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

also,
take a look at your servo monitor display on the TX. Verify you have as much aileron travel as elevator.
Once the BeastX is setup, it is acting as an angular velocity controller. So your inputs no longer directly control deflection, but instead command a specific rotational rate. So if not inputting exactly same values from TX, the commanded rates will be different

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 08:17 PM  5 years agoPost 8
VANHELI

rrVeteran

Omaha,Nebraska

My Posts: All  Forum  Topic

I will check that out. Never thought to look at the monitor screen. Thanks again! I wont be flying again till sunday but this gives me a couple things to try.

Dave V.

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 10:15 PM  5 years agoPost 9
helidevil

rrElite Veteran

Brunswick, ME

My Posts: All  Forum  Topic

make sure you have the needed 6 degrees of pitch in the cyclic pitch setup menu

PM  EMAIL  GALLERY  Attn:RR
12-16-2011 11:10 PM  5 years agoPost 10
VANHELI

rrVeteran

Omaha,Nebraska

My Posts: All  Forum  Topic

Ya, I checked the 6 degrees and have the blue light on that step in the setup.

Dave V.

PM  EMAIL  GALLERY  Attn:RR
12-18-2011 09:47 AM  5 years agoPost 11
titanchin

rrApprentice

Malaysia

My Posts: All  Forum  Topic

Yes. I feel cyclic slow, my version 3.0. Pls advise.

PM  EMAIL  GALLERY  Attn:RR
12-19-2011 03:47 AM  5 years agoPost 12
VANHELI

rrVeteran

Omaha,Nebraska

My Posts: All  Forum  Topic

Today I got a chance to fly a little and turning up the dual rate worked! I still think it is weird that only the aileron needed sped up but hey, it worked! I tried 120 first and it was crazy fast! turned it down to 110 and perfect!

Dave V.

PM  EMAIL  GALLERY  Attn:RR
12-21-2011 01:28 PM  5 years agoPost 13
titanchin

rrApprentice

Malaysia

My Posts: All  Forum  Topic

Wil try dr 120 this weedend

PM  EMAIL  GALLERY  Attn:RR
12-22-2011 10:43 AM  5 years agoPost 14
rchelinz

rrApprentice

New Zealand

My Posts: All  Forum  Topic

Graet, keep the thoughts coming I got the same issue with just the aileron

Raptor 90G4/ Trex744 Turbine/ Kasama 90N

PM  EMAIL  Attn:RR
12-22-2011 11:26 AM  5 years agoPost 15
blackbird

rrVeteran

thessaloniki-Greece

My Posts: All  Forum  Topic

Try the v 3.0.8 .

PM  EMAIL  GALLERY  Attn:RR
01-07-2012 04:31 AM  5 years agoPost 16
titanchin

rrApprentice

Malaysia

My Posts: All  Forum  Topic

Guys. Try get the usb set u can set the software peremetar from your pc. Feel great now. It can tune it very fast.

PM  EMAIL  GALLERY  Attn:RR
01-07-2012 04:46 AM  5 years agoPost 17
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

DO NOT use the extreme mode for control behavior

Use transmiter mode instead. Is much more direct, the responce is quicker, and you can tone it up or down using the dual rates.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
01-07-2012 05:04 AM  5 years agoPost 18
blackbird

rrVeteran

thessaloniki-Greece

My Posts: All  Forum  Topic

+1, in tx mode you can tune it how you like it.

PM  EMAIL  GALLERY  Attn:RR
01-07-2012 06:53 AM  5 years agoPost 19
nwmtech

rrApprentice

Bellingham, WA

My Posts: All  Forum  Topic

Correct, TX mode is the way to go. The control seems much more natural in TX mode adjusting the ATV's.

PM  EMAIL  GALLERY  Attn:RR
01-07-2012 04:43 PM  5 years agoPost 20
dragonflya

rrApprentice

Evergreen Aviation RC Club, Flyaway RC Club Oregon

My Posts: All  Forum  Topic

In transmitter mode assuming I already have it set up in Pro, can I adjust just the dual rates for say aileron To 110 or do i need to re-program all...?
I've had a couple of flights but real slow on the roll for me.


AMA #909110

PM  EMAIL  GALLERY  Attn:RR
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2506 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsBeastX › Beastx...slow aileron
 Print TOPIC  Make Suggestion 

 10  Topic Subscribe

Sunday, September 24 - 2:15 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online