RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 1579 views
Scorpion Power Scorpion Power
Helicopter
e-
Henseleit TDR MP-XLE MP-E
› canopy decals
12-14-2011 01:50 AM  5 years agoPost 1
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

Does anyone know the measurements on the TDR they do on the video for installing the decals on the canopy, I have no sound on the video and the quality does not allow me to see the measurments.
Thanks in advance, Bill

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2011 02:05 AM  5 years agoPost 2
dumbthumb75

rrApprentice

Oslo, Norway

My Posts: All  Forum  Topic

50mm from cutout, along the seam.
25mm from seam across. (for 50mm total)

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2011 02:15 AM  5 years agoPost 3
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

Just the information I was looking for, Thank you dumbthumb75.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
02-12-2013 12:55 AM  4 years agoPost 4
JRAY

rrVeteran

LaGrange, Georgia,​USA

My Posts: All  Forum  Topic

Awesome! A little searching and find just what I was looking for. Old thread revival.

I am serious.....and don't call me Shirley.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-12-2013 01:06 AM  4 years agoPost 5
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

Not sure why they don't put the dimensions in the manual!

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
02-12-2013 01:30 AM  4 years agoPost 6
JRAY

rrVeteran

LaGrange, Georgia,​USA

My Posts: All  Forum  Topic

I know, right? I had the same problem and was about to open my own thread, when I figured that I'd search. Good thing RR's search works well.

I am serious.....and don't call me Shirley.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 01:50 AM  4 years agoPost 7
chrisansilver

rrNovice

Texas

My Posts: All  Forum  Topic

Can someone point me in the direction of the video? Will be building my TDR soon.. Looked and could not find.

2 x TDR's Powercroco / Diablo 800+ / 700 12s / 700 14s / Logo 800 / 700 / Logo 600SE / Goblin

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:12 AM  4 years agoPost 8
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

The video was on Henseleits web page.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:16 AM  4 years agoPost 9
chrisansilver

rrNovice

Texas

My Posts: All  Forum  Topic

I'll go have a look, thanks...

2 x TDR's Powercroco / Diablo 800+ / 700 12s / 700 14s / Logo 800 / 700 / Logo 600SE / Goblin

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:35 AM  4 years agoPost 10
HilliHeli

rrVeteran

S.MI./FL.

My Posts: All  Forum  Topic

dumbthumb75's post is correct (I used these dimensions myself)
50mm from cutout, along the seam.
25mm from seam across. (for 50mm total)
50mm is forward of the top opening (area around the swash)

25mm is from each-side at that 50mm point

Here's a pic. of mine, you can see how-much over-lay I had on my center-section if you look closely ;

!Antriebe, die bewegen!
Henseleit-Helicopters.de
Jazz', Jives & vbar's
Futaba FASST / FASSTest

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 10:22 AM  4 years agoPost 11
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

Just remember to sand the seam where the canopy comes togeather or it will show through the decal. From the nose of the canopy to about2 3/4 inches to the swash opening.
Use soapy water on the canopy and the decal and you can move the decal around until you get it where you want it, then squeegee out the air bubbles. Its pretty easy once you get going. It also helps to soak the decal in the soapy water before removing the backing.

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 01:43 PM  4 years agoPost 12
chrisansilver

rrNovice

Texas

My Posts: All  Forum  Topic

I found the video, no big deal just needed the measurements, I have applied larger decals from my planking days and used same application. Thanks again..

2 x TDR's Powercroco / Diablo 800+ / 700 12s / 700 14s / Logo 800 / 700 / Logo 600SE / Goblin

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:02 PM  4 years agoPost 13
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

What colors did you get?

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:04 PM  4 years agoPost 14
chrisansilver

rrNovice

Texas

My Posts: All  Forum  Topic

Black canopy, yellow windscreen and silver comet.

2 x TDR's Powercroco / Diablo 800+ / 700 12s / 700 14s / Logo 800 / 700 / Logo 600SE / Goblin

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:11 PM  4 years agoPost 15
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

That should show up nice in the air!

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:18 PM  4 years agoPost 16
chrisansilver

rrNovice

Texas

My Posts: All  Forum  Topic

Thats the thinking behind it, should stand out.

2 x TDR's Powercroco / Diablo 800+ / 700 12s / 700 14s / Logo 800 / 700 / Logo 600SE / Goblin

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 02:24 PM  4 years agoPost 17
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

Enjoy the build and the first flight!

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
03-04-2013 10:10 PM  4 years agoPost 18
JRAY

rrVeteran

LaGrange, Georgia,​USA

My Posts: All  Forum  Topic

Still no sound on that thing, huh?

I am serious.....and don't call me Shirley.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1579 views
Scorpion Power Scorpion Power
Helicopter
e-
Henseleit TDR MP-XLE MP-E
› canopy decals
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, November 19 - 8:43 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online