RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1119 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Spektrum DSM › dx7s and ar7100r revlimiter setup?
12-14-2011 12:06 AM  5 years agoPost 1
love2flylow

rrApprentice

New Hampshaa US of A

My Posts: All  Forum  Topic

hello all having problems with the dx7s and the ar7100r revlimiter setup. for some reason i cant get the revlimiter to calibrate. im pretty sure it has to do with assining channels but cant figure it out. anyone else own this combo?. im also using the beastx if that helps. thanks

PM  EMAIL  Attn:RR
12-14-2011 12:28 AM  5 years agoPost 2
Michaelm0268

rrApprentice

Louisiana

My Posts: All  Forum  Topic

Look the manual up on the Internet goes through step by step how to set it up with a dx-7.

PM  EMAIL  GALLERY  Attn:RR
12-14-2011 12:32 AM  5 years agoPost 3
Michaelm0268

rrApprentice

Louisiana

My Posts: All  Forum  Topic

Make sure you sensor is mounted the correct distance away from backplate I think it .05 mm away? But not positive on it.

PM  EMAIL  GALLERY  Attn:RR
12-14-2011 04:42 PM  5 years agoPost 4
love2flylow

rrApprentice

New Hampshaa US of A

My Posts: All  Forum  Topic

yes found that but this is the dx7s so setup is different it has a governer menu versus the aux2 and gear on the older dx7 thanks

PM  EMAIL  Attn:RR
12-14-2011 04:45 PM  5 years agoPost 5
Michaelm0268

rrApprentice

Louisiana

My Posts: All  Forum  Topic

Thought you said dx-7. I have no experience with the dx-7s.

PM  EMAIL  GALLERY  Attn:RR
12-14-2011 05:28 PM  5 years agoPost 6
love2flylow

rrApprentice

New Hampshaa US of A

My Posts: All  Forum  Topic

ok thanks anyways yea its a brand new radio came out this week

PM  EMAIL  Attn:RR
12-14-2011 07:00 PM  5 years agoPost 7
cbflys

rrVeteran

Nesconset, NY - USA

My Posts: All  Forum  Topic

Make sure you have the frame rate set at 22 mSec. I believe there is an issue with trying to calibrate the AR7100R using the 11 mSec frame rate.

PM  EMAIL  GALLERY  Attn:RR
12-14-2011 08:49 PM  5 years agoPost 8
love2flylow

rrApprentice

New Hampshaa US of A

My Posts: All  Forum  Topic

frame rate is at 22. the reciver is working perfect just cant seem to get into the revlimiter calibration. think i just need to find the right combination of switch assignments to seperate the gyro and governer rates and also be able to switch to different headspeeds with one of the switches. thanks to everyone whos trying to help.

PM  EMAIL  Attn:RR
12-14-2011 11:13 PM  5 years agoPost 9
love2flylow

rrApprentice

New Hampshaa US of A

My Posts: All  Forum  Topic

update

correction i have the ar7110R. talked with horizon today and they told me to put the frame rate at 11 (Dsmx) so i did and now my gov is working but still cant get into calibration mode. the guys at horizon are stumped due to the fact that im setup excactly how it should be and am doing the right things so ill keep in touch when they or i figure this out.

PM  EMAIL  Attn:RR
12-15-2011 09:33 PM  5 years agoPost 10
Adams

rrApprentice

Champaign Il. USA

My Posts: All  Forum  Topic

This is John Adams from Horzion, Be sure your transmitter is in 11ms mode and rebind your reciever/ transmitter. Test that in the monitor screen the gear channel is dirving the cursor full range when activated. (Note this is likely the problem as the gear channel is asigned to the Gyro). If you can't get it then PM me your phone # and I call you.

PM  EMAIL  Attn:RR
12-15-2011 11:59 PM  5 years agoPost 11
love2flylow

rrApprentice

New Hampshaa US of A

My Posts: All  Forum  Topic

figured it out along with help from horizon! governer rates have to be at +100 AND -100 i had them both at +100 now im all set.

PM  EMAIL  Attn:RR
WATCH
 1 page 1119 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Spektrum DSM › dx7s and ar7100r revlimiter setup?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, September 19 - 11:21 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online