RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 617 views
Scorpion Power Scorpion Power
HelicopterEngines Plugs Mufflers Fuel › cline reg question
12-12-2011 11:09 PM  5 years agoPost 1
geomecc

rrKey Veteran

Long Island ,NY

My Posts: All  Forum  Topic

my os91sx came with the cline regulator and I broke the fuel inlet nipple. where can I get a replacement regulator

R I P Roman Jr. Team SKOOKUM SRW EFC

PM  EMAIL  GALLERY  Attn:RR  Quote
12-12-2011 11:20 PM  5 years agoPost 2
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2011 04:08 PM  5 years agoPost 3
MikeSherman

rrVeteran

Franksville, WI

My Posts: All  Forum  Topic

I have 2 cline regulated OS91's and never used the elbow. I just push the fuel tubing onto the...ahem...nipple.

I do place a thin band of fuel tubing over the fuel line to help keep it in place. Never had a problem.

You could just give it a try.

-Mike

Team QuickUK Pilot
Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2011 01:11 PM  5 years agoPost 4
geomecc

rrKey Veteran

Long Island ,NY

My Posts: All  Forum  Topic

the elbow is easy to come off that's the reason I want to replace it. is it supposed to b able to b removed? it looked like someone glued the elbow fitting on and I thought I broke it again

R I P Roman Jr. Team SKOOKUM SRW EFC

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2011 04:02 PM  5 years agoPost 5
PJRono

rrKey Veteran

Minnesota, Ya!

My Posts: All  Forum  Topic

Mine had an elbow, but it came off and I couldn't get it to stay on. Even tried to use glue with no success. Now I just use the original nipple without the elbow and an extra piece of fuel tubing over the top of the fuel line. The nipple and line must be clean when you do this and it WILL stay on.

If you skip me I can't play!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2011 04:58 PM  5 years agoPost 6
brandon113

rrApprentice

bedford, texas

My Posts: All  Forum  Topic

Hey cline experts, I have a cline that is on a old OS 90 and cant remember if the check valve has to be mounted with no longer than 10mm of fuel line from the engine or is that a YS? Think the fuel line expands and reduces the pressure pulse to the fuel tank, can't remember.....

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2011 05:58 PM  5 years agoPost 7
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

The shorter the line off the backplate, the more the pressure wave is preserved and the better the check valve will cycle. IOW, keep it as short as you can. My opinion aside, this was also SOP for the gentleman that devised the carb mods that allowed the Cline to work so well fo us.

Ben Minor

Team Synergy Team Futaba Team Kontronik USA
Progressive RC

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2011 06:13 PM  5 years agoPost 8
brandon113

rrApprentice

bedford, texas

My Posts: All  Forum  Topic

Great that is what makes sense but couldn't remember....fixing to fire up a 91 I rebuilt a while back but couldn't remember if there was a spec for that or not..

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 617 views
Scorpion Power Scorpion Power
HelicopterEngines Plugs Mufflers Fuel › cline reg question
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, November 22 - 2:49 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online