RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 726 views
Scorpion Power Scorpion Power
HelicopterRadio - JR DMSS › Who know the in and outs of 8103 I need help
12-05-2011 12:15 AM  5 years agoPost 1
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

I' trying to set up a trex 450. ccpm. But servo are not moving like them should be.. Ben so long I got in to the a set up.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-05-2011 12:35 AM  5 years agoPost 2
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

Not knowing exactly your problem...

Press both up and down buttons then turn Tx on. You are in SYSTEM MENU

In TYPE SELECT menu choose HELI

While still in SYSTEM MENU go to SWASH TYPE and select (3 servos 120 degrees)

The "SWASH TYPE" menu is only available under HELI programming.

Rx channels

#2 Aileron (left) servo
#3 Elevator (rear or forward servo depending on model)
#4 Gyro (tail rotor servo)
#5 Gain
#6 Pitch (right) servo

In FUNCTION LIST go to SWASH MIX where you can reverse the travel of any of the cyclic servo by reversing the value to negatives numbers. The default is 60...just go negative (-60).

Hopefully this will shine some light on your set up.

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR  Quote
12-05-2011 02:08 AM  5 years agoPost 3
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

Tryed it. Still on luck. I will info soon

PM  EMAIL  GALLERY  Attn:RR  Quote
12-05-2011 02:38 AM  5 years agoPost 4
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

help

More info. R an L aile moves right way with stick. But When stick is moved for elev up, Elev right But other servo's move down. Also when pitch is move up. all servo's move down.Tryed to reverse pitch, one servo goes down, others go up.Its beating me.lol HELP

and For The default is 60...just go negative (-60). Been there and done that. Still not right

PM  EMAIL  GALLERY  Attn:RR  Quote
12-05-2011 03:00 AM  5 years agoPost 5
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

Still playing with it. I seen on servo waging out a me. Maybe time to change out a sevro and try again

PM  EMAIL  GALLERY  Attn:RR  Quote
12-05-2011 03:07 AM  5 years agoPost 6
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

I find it easier to get the ELEVator to working correct first then the other two.

You may have to swap AIL and PITCH connectors (#2 and #6)

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR  Quote
12-05-2011 03:34 PM  5 years agoPost 7
Dex

rrNovice

Rochester, MN

My Posts: All  Forum  Topic

You will need to check and see if the "ccpm" has been activated on your 8103. Mine was not and Horizon Hobby activated for me. You can check in the System menu under swash. It should be listed there. If not nothing you do will make it work. You might be able to call HH Support and sometimes they will talk you through the access to the hidden menus by pressing a series of the buttons on the 8103 so you can activate it yourself.

PM  EMAIL  Attn:RR  Quote
12-05-2011 09:49 PM  5 years agoPost 8
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

Works on my other helis. Ok guys One thing I'm not new. I have set up many helis. Just to long ago.lolI got the heli use of here. To day at work I got thinking about it. Will check few things to night.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-05-2011 10:47 PM  5 years agoPost 9
Rafael23cc

rrKey Veteran

Junction City, KS

My Posts: All  Forum  Topic

thtoyman
More info. R an L aile moves right way with stick. But When stick is moved for elev up, Elev right But other servo's move down. Also when pitch is move up. all servo's move down.Tryed to reverse pitch, one servo goes down,
From this description, it sounds to me that you are reversing the channel and not reversing the swash function.
Pistol_Pete
In FUNCTION LIST go to SWASH MIX where you can reverse the travel of any of the cyclic servo by reversing the value to negatives numbers. The default is 60...just go negative (-60).
Rafael

Keep your feet on the ground, but your eyes on the sky.
Team Heliproz.com

PM  EMAIL  GALLERY  Attn:RR  Quote
12-06-2011 05:04 AM  5 years agoPost 10
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Works every time it's tried:

https://rc.runryder.com/helicopter/p4325158/

And just in case your 8103 is one of those EARLY ones that didn't come with CCPM enabled...

https://rc.runryder.com/helicopter/...CCPM_ENABLE.pdf

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
12-08-2011 10:20 PM  5 years agoPost 11
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

I think I found it. Will post when I done testing it

PM  EMAIL  GALLERY  Attn:RR  Quote
12-10-2011 06:25 PM  5 years agoPost 12
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

just a bad servo

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 726 views
Scorpion Power Scorpion Power
HelicopterRadio - JR DMSS › Who know the in and outs of 8103 I need help
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, November 21 - 8:20 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online