RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 610 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › looking for socket head screws for servos.
12-03-2011 01:30 AM  5 years agoPost 1
400 flyer

rrApprentice

maryland, usa

My Posts: All  Forum  Topic

heres a pic of what im looking for well something like it anyway. were can i get some? and what size do i need? thanks.

PM  EMAIL  GALLERY  Attn:RR
12-03-2011 01:40 AM  5 years agoPost 2
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

McMaster Carr They have it all.

I've never used these on any heli I've built or have I seen others use this type of screw. Which type of heli?

Jeff

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR
12-03-2011 01:42 AM  5 years agoPost 3
400 flyer

rrApprentice

maryland, usa

My Posts: All  Forum  Topic

for my evo 50. i dont like the stock screws so im looking for something like the pic.

ill see what they have.

o do you know were i can get some 3mm blue lock nuts??

PM  EMAIL  GALLERY  Attn:RR
12-03-2011 01:46 AM  5 years agoPost 4
Nelson34

rrApprentice

San jose ca

My Posts: All  Forum  Topic

I use those for my servos on my Radicals and Trex 500-they work great-that web site should have them-o got them at my LHS and paid 5 dollars for 10-I think WAY cheaper online.

PM  EMAIL  GALLERY  Attn:RR
12-03-2011 01:57 AM  5 years agoPost 5
400 flyer

rrApprentice

maryland, usa

My Posts: All  Forum  Topic

what size sould i look for? thanks.

PM  EMAIL  GALLERY  Attn:RR
12-03-2011 02:11 AM  5 years agoPost 6
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Most standard servos use M2.6 screws.

PM  EMAIL  Attn:RR
12-03-2011 02:57 AM  5 years agoPost 7
RobMcQuillen

rrKey Veteran

Rochester, NY

My Posts: All  Forum  Topic

I'm using M3 bolts in my BLS451 servos. I got them from Mcmaster-carr

Rob

Rob McQuillen

PM  EMAIL  GALLERY  Attn:RR
12-04-2011 01:31 PM  5 years agoPost 8
neilg.

rrVeteran

north of borston

My Posts: All  Forum  Topic

http://rtlfasteners.com/Merchant2/m...=&Store_Code=RF

In Nomeni Patri Et Fili Spiritus Sancti

PM  EMAIL  GALLERY  Attn:RR
12-04-2011 02:10 PM  5 years agoPost 9
z11355

rrMaster

New England

My Posts: All  Forum  Topic

When I had a Sceadu, I was using the 4-20 x 1/2" 'Plastite' screws from McMaster. They had a Torx head and were great for the non-through frame screws. As I recall, I was using the stock Hirobo screws for the servos though. In any event, it was a machine that really wanted a power driver (low clutch setting!) instead of a hand powered driver since the plastic was so d@mn hard.

PM  EMAIL  GALLERY  Attn:RR
12-04-2011 06:35 PM  5 years agoPost 10
400 flyer

rrApprentice

maryland, usa

My Posts: All  Forum  Topic

thanks for the link, i picked these up..
http://rtlfasteners.com/Merchant2/m...Product_Count=2

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 610 views POST REPLY
Scorpion Power Scorpion Power
HelicopterMain Discussion › looking for socket head screws for servos.
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, September 19 - 12:41 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online