RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 537 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › v-bar bind question
11-30-2011 01:10 AM  5 years agoPost 1
love for scale

rrVeteran

Omaha, Nebraska U.S.A.

My Posts: All  Forum  Topic

i am biulding a scle heli with retractable landing gear. i have the blueline satalite ready v-bar. when i use it in the scale body, with retracts, the v-bar has no port for a retract servo and no programming for a retract servo, so according to the guys at redy heli, i will need to run a seperate rx. So in this case, i believe i would bind my 9303 with the specktrum rx, then plug into the v-var per the diagram in the v-bar manual. now, in pod and boom form, i can use the satelites in the v-bar, with no other rx, because i will not need the retracts. so if i bind the tx to the v-bar, then later when the mech. go into the fuselage, i will need to add a seperate rx, so.... do i need to UNBIND the v-bar with satelites somehow? or just simply remove the satelites, then add the binded spektrum rx? greg

PM  EMAIL  GALLERY  Attn:RR
11-30-2011 01:49 AM  5 years agoPost 2
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Remove the sats, select seperate rx in the rx menu, bind rx to tx and all is good.

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 537 views POST REPLY
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › v-bar bind question
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, September 20 - 3:44 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online