RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 766 views POST REPLY
ProModeler Scorpion Power
HelicopterFuel-Helicopters New or Limited ActivityElyQ › Align gov on vision 90 ! advice please
11-12-2011 08:58 PM  5 years agoPost 1
supercptncrash

Heliman

sunny england

My Posts: All  Forum  Topic

please can someone point me in the right direction regarding my align governor on my vision 90 comp using a dx7 ? how to set up and looking for a head speed of around 1900

PM  EMAIL  Attn:RR
11-12-2011 10:07 PM  5 years agoPost 2
wifeorheli

Elite Veteran

reno, nevada usa

My Posts: All  Forum  Topic

hey im running the same gov and the same tx but on a 50 will be the same though you want it linked to flight mode switch or what are you looking to do?

Novarossi Motors U.S.A
www.PlanetHobby.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
11-12-2011 11:02 PM  5 years agoPost 3
supercptncrash

Heliman

sunny england

My Posts: All  Forum  Topic

i either need the ratio for the 90 so i can set it up via prog mixes or wanted to know whether i can just use travel adjust on aux 2 to alter headspeed??

PM  EMAIL  Attn:RR
11-12-2011 11:13 PM  5 years agoPost 4
wifeorheli

Elite Veteran

reno, nevada usa

My Posts: All  Forum  Topic

I use the mixes and say you use gear channel mix gear to gear and set the percentge that way. then you can have up to 3 headspeeds per flight mode and have a straight up on/off switch via the gear switch. As far as the gear ratio im not sure i will have to find out. Do you know what the pinion and main gear size is?

Novarossi Motors U.S.A
www.PlanetHobby.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
11-13-2011 09:41 PM  5 years agoPost 5
supercptncrash

Heliman

sunny england

My Posts: All  Forum  Topic

wifeorheli mate im gonna run the governor as if its on a 700 at a ratio of 8.2 - 1 and play about with the percentages from there i think ! had a play around today with my curves but couldnt get a headspeed i was happy with !!

PM  EMAIL  Attn:RR
11-14-2011 01:06 AM  5 years agoPost 6
wifeorheli

Elite Veteran

reno, nevada usa

My Posts: All  Forum  Topic

cool if you got a tach you will be fine. Are you running 3 different headspeeds threw the dx7?

Novarossi Motors U.S.A
www.PlanetHobby.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 766 views POST REPLY
GLOBAL 3D ProModeler
HelicopterFuel-Helicopters New or Limited ActivityElyQ › Align gov on vision 90 ! advice please
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, June 29 - 6:33 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online