RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1186 views POST REPLY
HelicopterFuel-Helicopters New or Limited ActivityAvant › What main shaft to use with fbl rjx head on my E-Aurora
10-27-2011 08:25 AM  6 years agoPost 1
trexstuntin3d

rrNovice

Ca

My Posts: All  Forum  Topic

I heard about someone snapping there main shaft mid flight in 3d.
who sells the right hardened shaft?
I have a rjx head fbl conv. but can't afford one of these failures.
Is the special edition shaft from avant the new fix for this?
http://www.heliproz.com/prodinfo.asp?number=AV900237

PM  EMAIL  Attn:RR  Quote
10-27-2011 08:34 AM  6 years agoPost 2
GraZer

rrApprentice

Cape Town, South Africa

My Posts: All  Forum  Topic

The failure you are referring to occurred with the original hollow shaft (AV900239).
https://rc.runryder.com/helicopter/t643777p1/
The main shaft was later updated to a solid shaft (AV900239), which has now been superseded by the SE (Special Edition) main shaft (AV900237). The SE main shaft is also the same main shaft that the RigidCore head is supplied with.

So to answer your question, yes the link you have posted is the correct main shaft to use.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-01-2011 03:39 AM  6 years agoPost 3
Justin Stuart (RIP)

rrMaster

Plano, Texas

My Posts: All  Forum  Topic

If you're going to use an aftermarket FBL head on the Aurora, you definitely want to be using one of the main shafts which are stamped with "SE" on the side of them. They are solid in the center and hardened.

Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives

PM  EMAIL  GALLERY  Attn:RR  Quote
11-07-2011 06:06 AM  6 years agoPost 4
trexstuntin3d

rrNovice

Ca

My Posts: All  Forum  Topic

se shaft
Has anyone had any luck buying parts?
I can't find anyone in stock with this part.
AV900237 solid shaft
Has anyone gotten a order from carbon extreme for under $75 and shipping Take forever?
On there website they say your order basically will be on back burner if order isn't over $75
Thanks guy's

PM  EMAIL  Attn:RR  Quote
11-07-2011 01:10 PM  6 years agoPost 5
Justin Stuart (RIP)

rrMaster

Plano, Texas

My Posts: All  Forum  Topic

You'll really want to get a hold of the AV900237 version of the main shaft if you're going to be using that RJX FBL head. Am I understanding you correctly that you've already placed an order with CarbonXtreme?

Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives

PM  EMAIL  GALLERY  Attn:RR  Quote
11-07-2011 05:41 PM  6 years agoPost 6
trexstuntin3d

rrNovice

Ca

My Posts: All  Forum  Topic

order
No I have not placed one, I tried and had order above $75 and it then said it was back order/ out of stock. I went to a couple other vendors and they are all on back order...
The post above was a typo

PM  EMAIL  Attn:RR  Quote
11-07-2011 06:20 PM  6 years agoPost 7
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

Has anyone gotten a order from carbon extreme for under $75 and shipping Take forever?
On there website they say your order basically will be on back burner if order isn't over $75
Thanks guy's
I have placed an order with Carbon Xtreme,

it would not allow me to check out unless I had a total of over $75,
I added other spares to bring the total above $75

Then it took over a week to get confirmation of the order, in the meantime I was in limbo not knowing if theorder even went through.

Then add ANOTHER week for them to ship after they charged $20 for shipping, that was the cheaper option.

I have an Avant EX so I have no other choise.
$

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-07-2011 07:01 PM  6 years agoPost 8
Justin Stuart (RIP)

rrMaster

Plano, Texas

My Posts: All  Forum  Topic

Hey trexstutin3d, the AV900237 main shaft you need is in stock right here:

http://www.carbonxtreme.com/catalog...p/av900237.html

Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives

PM  EMAIL  GALLERY  Attn:RR  Quote
11-08-2011 05:25 AM  6 years agoPost 9
trexstuntin3d

rrNovice

Ca

My Posts: All  Forum  Topic

thanks broski
thank you Justin I will try again.

PM  EMAIL  Attn:RR  Quote
12-01-2011 04:39 AM  6 years agoPost 10
Ducati996

rrApprentice

Reno, Nevada

My Posts: All  Forum  Topic

Amain
They have the AV900237 in stock. I just got mine. Go get them.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1186 views POST REPLY
HelicopterFuel-Helicopters New or Limited ActivityAvant › What main shaft to use with fbl rjx head on my E-Aurora
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, April 19 - 4:51 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online