RunRyder RC
| 1 Topic Subscribe |
WATCH |
1 page 969 views | POST REPLY |
| Scorpion Power | Scorpion Power |
|
|
| 10-24-2011 08:54 PM 6 years ago | Post 1 |
 rcnutrrElite Veteran Rockford, Illinois | This last weekend was great...possibly the last good 70'ish degree weekend before the snow fall here in the Midwest.I was having problems with the nose bobbling up and down during tic toc's, forward and back flips, or anything requiring elevator. I tried adjusting the flight gain, but had a very small affect. Then after a fight session, while cleaning, I noticed the mainshaft was a bit wobbly. I could move the mainshaft forward and backwards a small amount. Ha...this is where the bobbling is coming from. The bearing blocks were wearing out. So I ordered a set of CNC aluminum blocks. I received them on Wednesday and installed them Friday night. Saturday I took my Rave out for some test flying.WoW What a difference that made! The Bobbling stopped and I was able to increase the flight gain back to where it was. Now my Rave is solid once again! Now to re-tune the motor and get rid of that pesky tail twitch!Thanks P. Johnson!Team Miniature Aircraft | ||
| |||
| 11-03-2011 04:30 PM 6 years ago | Post 2 |
| WreckRman2 rrKey Veteran Orlando, FL | I noticed mine getting alittle loose as well. I simply opted to remove the bearings and epoxy them into the bearing holders. That improved it greatly and without any extra cost.What flybarless system are you using? Are you using the TotalG?________________ | ||
| |||
| 11-05-2011 01:27 PM 6 years ago | Post 3 |
| rcnut rrElite Veteran Rockford, Illinois | Hey WreckRman2,I am using the Total-G and loving it. I also have the Beast X and I'm pitting the two against one another. To see which one is better or what the difference is between the two...including programming.I simply opted to remove the bearings and epoxy them into the bearing holders. | ||
| |||
| 11-05-2011 01:45 PM 6 years ago | Post 4 |
| WreckRman2 rrKey Veteran Orlando, FL | Where are you running your stops on the total g?________________ | ||
| |||
| 11-06-2011 12:49 PM 6 years ago | Post 5 |
| rcnut rrElite Veteran Rockford, Illinois |
Where are you running your stops on the total g? | ||
| |||
WATCH |
1 page 969 views | POST REPLY |
| Scorpion Power | Scorpion Power |
|
|
| Print TOPIC | Make Suggestion |
Tuesday, April 24 - 5:21 pm - Copyright © 2000-2018 RunRyder EMAIL • Enable Cookies
