RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 637 views POST REPLY
HelicopterCentury Radikal G20-30 N640 Hawk Predator › G30 tail bellcrank lever problem?
08-04-2011 01:28 AM  6 years agoPost 1
funkyflyer

rrVeteran

Griffith, IN.

My Posts: All  Forum  Topic

Ok, I just finished my G30 and I have a question. I had issues getting the tail to slide smoothly. After some trial and error, I got smooth movement out of it, but I just noticed that my bellcrank lever is not at 90 degrees. That is, when you look at it from the rear of the heli it is going at a slightly upward angle. The bellcrank lever seems ok, rather the problem seems to be the L bracket it attatches to is not exactly an L. I have checked, and nothing is cracked or split, so is this just how these helis are? Everything moves smoothly, and it seems fine, I am just making sure I didn't do something wrong, I would hate to put her in on her maiden flight.

Wow, the ground was closer than I thought.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-04-2011 02:07 AM  6 years agoPost 2
RM3

rrElite Veteran

Killeen, Texas - USA

My Posts: All  Forum  Topic

The one on the Radikal G20 is idential to the G30, I have a G20 and it is 90 degrees. Make sure its sitting Flat against part #14(the Trail frame surface). otherwise if its a little bent my guess it is a manufacturing flaw.

showing a preference will only get you into trouble, 90% of everything is crap...

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 637 views POST REPLY
HelicopterCentury Radikal G20-30 N640 Hawk Predator › G30 tail bellcrank lever problem?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, April 25 - 11:53 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online