RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 851 views POST REPLY
HelicopterRadio - Servo - Gyro - Gov - Batt › FUTABA CGY 750 WITH JR RADIO HELP
08-02-2011 03:23 PM  6 years agoPost 1
TECO

rrVeteran

WARWICK RI, USA

My Posts: All  Forum  Topic

HI TO ALL?
I need a new gyro for my 600n, love futaba servos and Gyro, i was wonder if the CGY 750 will work on my 11X or do i need some kind conecter,

thanks

teco

"Never argue with an idiot - he'll drag you down to his level and beat you with experience

PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2011 03:31 PM  6 years agoPost 2
jbiter

rrKey Veteran

Sebring, FL

My Posts: All  Forum  Topic

If you are wishing to fly a fly-barred heli then the GY701 would be a better choice. The CGY750 is for flybarless applications and it requires an adapter to work with your JR radio.

Jeff

PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2011 03:46 PM  6 years agoPost 3
TECO

rrVeteran

WARWICK RI, USA

My Posts: All  Forum  Topic

huunnnn, so the 701 has no FBL on it and the 750 has, got ya, so if i buy the 701 i will not need an adapter? will work just like the old ones, 502, 601 and 611?

"Never argue with an idiot - he'll drag you down to his level and beat you with experience

PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2011 04:19 PM  6 years agoPost 4
Santiago P

rrProfessor

South West, Ohio

My Posts: All  Forum  Topic

The CGY750 is only compatible with S-Bus Receivers.

Dont know if the adapter for other RX is out yet.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-02-2011 04:50 PM  6 years agoPost 5
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

Yes, the GY-701 will work like the older Futaba Gyros, plus the governor feature will work like the old GV-1.

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2011 05:06 PM  6 years agoPost 6
TECO

rrVeteran

WARWICK RI, USA

My Posts: All  Forum  Topic

and how the govs work, is it good?

"Never argue with an idiot - he'll drag you down to his level and beat you with experience

PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2011 05:54 PM  6 years agoPost 7
Wyorcflyer

rrVeteran

Cheyenne, Wyoming USA

My Posts: All  Forum  Topic

and how the govs work, is it good?
Yes, the gov portion of the 701 and 750 is very good. Set the RPM directly in the unit (you want 2100 put in 2100) and go fly.

Or if you want to have more than one RPM put three different RPMs on a three position switch and fly whatever RPM you want.

Jack

PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2011 09:13 PM  6 years agoPost 8
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

On the governor side, if you are using the OS55 or 91 engine, the new BPS-1 sensor works great, no more magnets, easy installation.

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2011 09:31 PM  6 years agoPost 9
TECO

rrVeteran

WARWICK RI, USA

My Posts: All  Forum  Topic

will put on a YS56 SR.
What you think?

"Never argue with an idiot - he'll drag you down to his level and beat you with experience

PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2011 03:04 AM  6 years agoPost 10
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

The BPS-1 sensor will not work (at least there's no way to mount it like on the OS) on the YS. Now the sensor will read, but I don't have any idea how you can mount it. You would have to use the standard governor pickup that mounts to the motor mount and uses magnets on the fan.

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2011 04:00 AM  6 years agoPost 11
Wyorcflyer

rrVeteran

Cheyenne, Wyoming USA

My Posts: All  Forum  Topic

kcordell

Do you have the BPS-1?

If so does it just press into the motor backplate hole? If so it must press in pretty hard to keep it from vibrating out.

If it is solid it sounds like a must have for a motor that has a provision for it.

Jack

PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2011 01:14 PM  6 years agoPost 12
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

Yes, I have a BPS-1. I got the OS backplate for my OS 55 with the mount for the BPS-1. Before I mounted the backplate on the motor, I put a piece of tape over the center pressure hole on the inside (crank side) of the plate. I then filled the pressure hole with a small amount of JB Weld. After it cured, I removed the piece of tape, giving me a very smooth surface on what is inside.
The BPS-1 sensor is mounted in the sensor hole after filling the sensor hole about 1/2 with RTV (I used clear Permatex RTV). Push the BPS-1 sensor into the hole, wipe off the excess RTV and let cure overnight. Then mount the backplate on the motor, plug the sensor into the appropriate slot on the GY-701 (or CGY-750). Turn on you TX/RX. Go to the sensor % screen on the GY-701. Spin the motor with your starter (it will NOT read correctly spinning by hand) just like you were starting the model. Look at your max % and it should be well above 60%. Mine was 86%. Now, if you are just replacing the other sensor, you are ready to go. If this is your first installation of the unit, set it up and you will be ready to go.

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2011 01:20 PM  6 years agoPost 13
Wyorcflyer

rrVeteran

Cheyenne, Wyoming USA

My Posts: All  Forum  Topic

^^^^^^^^^^^^Thanks Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 851 views POST REPLY
HelicopterRadio - Servo - Gyro - Gov - Batt › FUTABA CGY 750 WITH JR RADIO HELP
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, January 21 - 6:52 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online