RunRyder RC
 6  Topic Subscribe
WATCH
 1 page 2121 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › Futaba 8FG
04-28-2011 04:42 PM  6 years agoPost 1
Alanzo1979

rrNovice

Coconut Creek ,Florida-USA

My Posts: All  Forum  Topic

hey guy
does anybody know how bobby watts got his gyro menu active 1 then to the right of it said 1/3 then he using sensor touch to scroll throw each of the gyro menu just wondering how he did it

PM  EMAIL  GALLERY  Attn:RR
04-28-2011 05:17 PM  6 years agoPost 2
rexxigpilot

rrProfessor

Florida

My Posts: All  Forum  Topic

Not sure what BW did, but if you are trying to get all three gyros of the CGY750 to appear in the TX, you have to do the following. Go to the function menu and change two Aux channels (or whatever) to Gyro(Ail) for one and to Gyro(Ele) for the other.

PM  EMAIL  GALLERY  Attn:RR
04-28-2011 05:30 PM  6 years agoPost 3
Alanzo1979

rrNovice

Coconut Creek ,Florida-USA

My Posts: All  Forum  Topic

Ok will try that and see what happen

PM  EMAIL  GALLERY  Attn:RR
04-28-2011 07:13 PM  6 years agoPost 4
Alanzo1979

rrNovice

Coconut Creek ,Florida-USA

My Posts: All  Forum  Topic


this what im talking this is what he has on his on gyro menu

PM  EMAIL  GALLERY  Attn:RR
04-28-2011 09:43 PM  6 years agoPost 5
Skaluf

rrVeteran

Champaign, IL

My Posts: All  Forum  Topic

If you are just trying to move to the second and third pages, just touch S1, it will page you through each one.

Steve

Steve Kaluf
Hobbico

PM  EMAIL  GALLERY  Attn:RR
05-08-2011 01:49 AM  6 years agoPost 6
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

why won't my 750 show the gain for gyro(ail) and gyro(ele)? it shows the rudder just fine. i updated it to the latest firmware. my gyro screen shows all 3 gyros but it doesn't look like Bobby's screen.i will post pics tomorrow.

PM  EMAIL  GALLERY  Attn:RR
05-08-2011 07:16 AM  6 years agoPost 7
astr0b0y

rrNovice

Australia

My Posts: All  Forum  Topic

I reckon that screen set up was on a pre-release version of the current software and not in the final release we are all running.

PM  EMAIL  Attn:RR
05-08-2011 08:41 AM  6 years agoPost 8
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

oh...ok. but why isn't the 750 showing the gain values? also when i pick up the heli to check for proper correction nothing happens.

PM  EMAIL  GALLERY  Attn:RR
05-08-2011 09:01 AM  6 years agoPost 9
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

You need to select Mlt2 transmission, then under function choose gyro 2 and 3 function for two extra channels

It you will get 3 gyros in the menu.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR
05-08-2011 11:46 AM  6 years agoPost 10
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

H

I'll check to see what I have when I get home. I'm at work at the moment. Can they be any spare channel or should they be an aux channel?

PM  EMAIL  GALLERY  Attn:RR
05-08-2011 12:59 PM  6 years agoPost 11
kcordell

rrElite Veteran

O Fallon, MO

My Posts: All  Forum  Topic

And, when checking gyro direction for ail/ele, runs the gains to 100%. You won't see very much opposite defelection at all with the gains at 50%. Once you verify proper direction, set the gains back to 50%.

Team Futaba, Team Synergy/Rail, Team Scorpion, Team Castle Creations, YS Engines, VelTye

PM  EMAIL  GALLERY  Attn:RR
05-09-2011 03:29 AM  6 years agoPost 12
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

problem solved, finally.

PM  EMAIL  GALLERY  Attn:RR
05-09-2011 11:38 AM  6 years agoPost 13
astr0b0y

rrNovice

Australia

My Posts: All  Forum  Topic

How did you solve it and does it look like Bobby's screen?

PM  EMAIL  Attn:RR
05-09-2011 04:35 PM  6 years agoPost 14
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

It doesn't look like Bobby's screen. I think he has en earlier beta version of the new update. I had to use the aux1 and aux2 channels.

PM  EMAIL  GALLERY  Attn:RR
05-09-2011 04:38 PM  6 years agoPost 15
Alanzo1979

rrNovice

Coconut Creek ,Florida-USA

My Posts: All  Forum  Topic

Bobby's video was shot with pre-release software in the 8FG. In your case, scroll to one of the gyros like RUD and hit return (RTN)this will move you to the detailed menu for that particular gyro.

that message steve sent me

PM  EMAIL  GALLERY  Attn:RR
05-09-2011 05:10 PM  6 years agoPost 16
DougV

rrVeteran

Miramar, Florida - USA (Ft. Lauderdale)

My Posts: All  Forum  Topic

Yes, Bobby's screen is a pre-release software.

Look at the 8FGS manual on page # 106, or see page 4 of the update pdf document on the Futaba download page.

Quote

* When using the gyro2/gyro3 function, assign gyro2/
gyro3 to any channel on the function screen.

Doug.

PM  EMAIL  GALLERY  Attn:RR
05-17-2011 03:02 AM  6 years agoPost 17
dsl11us

rrApprentice

drums pa usa

My Posts: All  Forum  Topic

i am also trying to set it up and having a hard time. i am doing excatly what hes doing. but i flip my swicth nothing happens it turns on/off but when scroll to #2 and try to toggle nothing i set the group but i have nothing what am i diong wrong.

PM  EMAIL  GALLERY  Attn:RR
05-17-2011 03:21 AM  6 years agoPost 18
carcrasher

rrElite Veteran

east coast

My Posts: All  Forum  Topic

I had to assign my gryo2&3 to my aux channels. Make sure 1 is arcs and two is normal. What switches are you using?

PM  EMAIL  GALLERY  Attn:RR
05-17-2011 05:03 AM  6 years agoPost 19
Mike Fortin

rrElite Veteran

USA

My Posts: All  Forum  Topic

After you update the software, make sure that you select Multi2. Once you do this it will give you the 3 Axis gyro screen.

Have Rotors, Will Fly!

PM  EMAIL  GALLERY  Attn:RR
05-18-2011 01:45 AM  6 years agoPost 20
dsl11us

rrApprentice

drums pa usa

My Posts: All  Forum  Topic

I got it

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 2121 views POST REPLY
Scorpion Power Scorpion Power
HelicopterRadio - Futaba FASST › Futaba 8FG
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Monday, September 25 - 4:18 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online