RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 753 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › help with vbar servo reverse issue
04-27-2011 02:08 PM  6 years agoPost 1
hotrodcaddy3

rrApprentice

oneida, ny , united​states

My Posts: All  Forum  Topic

trex 700n with vbar 5.0

i hooked up the wires as stated in the book and i am getting servos not moving in the right direction. please help before i set the vbar on fire and get a skookum..

watch me fly this, don't worry, read the book that came with the heli!!

PM  EMAIL  GALLERY  Attn:RR
04-27-2011 04:24 PM  6 years agoPost 2
ChristianM

rrVeteran

Oslo, Norway

My Posts: All  Forum  Topic

You do not need the AR7000 and the GV-1 when using a VBar so you can sell them. Use two spectrum satelite RXs connected directly to the VBar unit. The VBar also has a governor built in to it so all you need is a RPM sensor. You can use the GV-1 sensor (if you decide not to sell it) or you can purchase another sensor such as the Spectrum back plate sensor. That should simplify your setup considerably.

Christian

Burn fuel, be happy

PM  EMAIL  GALLERY  Attn:RR
04-27-2011 05:15 PM  6 years agoPost 3
raptormandan

rrApprentice

springhill florida

My Posts: All  Forum  Topic

help

like chris said...i use 2 sat rx's....get a back plate sensor from horizon...simple...upgrade ur vbar to pro.. use that gov already built in..enjoy

PM  EMAIL  GALLERY  Attn:RR
05-03-2011 03:15 AM  6 years agoPost 4
hotrodcaddy3

rrApprentice

oneida, ny , united​states

My Posts: All  Forum  Topic

ok so i hooked it up as the setup wizard states and no matter what i do the servos don't move the right way, what am i missing

watch me fly this, don't worry, read the book that came with the heli!!

PM  EMAIL  GALLERY  Attn:RR
05-03-2011 03:24 AM  6 years agoPost 5
rexxigpilot

rrProfessor

Florida

My Posts: All  Forum  Topic

Have you reversed the servos direections as needed in the Servo tab of the setup? You click on the image of the servo to toggle between reverse/normal direction.

PM  EMAIL  GALLERY  Attn:RR
05-03-2011 08:07 AM  6 years agoPost 6
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Shot out of the dark,
Like rexxigpilot pointing out, check the SWASH step and match those channels to your physical arrangement and which channels those are plugged into.

99.9% of these issues: You have swapped Channel 2 & 3 servo cables.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 753 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › help with vbar servo reverse issue
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, November 18 - 2:55 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online