Up for sale is my 450 Sport, I’m selling it to help fund a different project. It’s in excellent condition, needs nothing--just bind to your tx and fly. Specs are:
DS410M cyclic servos
DS520 tail servo, I didn’t like the 420 that came with it.
2-hole SE V2 tail servo mounts to accommodate the 520, the original 1-hole mounts are included. (Original mounts not pictured).
Align torque tube conversion kit installed. The original belt drive pieces (boom block, boom, tail case and belt) are included. The original boom has a tiny ding in it.
Align 325D Pro main blades
Align 450M motor
Spektrum AR6100e rx
Align ESC RCE-BL35X
Canomod “Phantom” canopy. The original canopy is also included, but it’s a crash veteran and is a bit rough. It’s in one piece, and is flyable.
Orange Fusuno vertical and horizontal fins. Original Align pieces also included
I was in a maintenance mood recently so I went through and replaced the bearings on the mixing arms, main shaft blocks, and blade grips. I also put in new dampers and thrust bearings. While I was at it I replaced the main and autorotation gears. I used the blue ones as my LHS didn’t have any white ones in stock. The skids are painted orange, and I used a carbon fiber tube on the tail pushrod so I could eliminate the guides.
I’ve got some spares that are also included:
Main shaft, new
Tail shaft, new
Black carbon fiber blades, don’t remember where they came from but they are new (not pictured).
Servo mounting nuts, 4 or 5 of them
Rdlohr flybar lock tool
Also included are two lipos, one Turnigy 2200 25-35C and a Flightmax 2200 20C. The Turnigy has about 30 cycles and the Flightmax less than 10.
Looking for $375 shipped to the lower 48.