RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 632 views POST REPLY
Scorpion Power Scorpion Power
HelicopterBeginners Corner › alloy king
04-08-2011 08:51 PM  6 years agoPost 1
naplestrapper

rrNovice

naples,fl usa

My Posts: All  Forum  Topic

I have a 36 inch alloy king rc helicopter,its seems like I trimmed out right but can't get it to fly forward any help would be great

PM  EMAIL  GALLERY  Attn:RR
04-09-2011 12:58 AM  6 years agoPost 2
willanyone1

rrApprentice

Griffith, IN U.S.

My Posts: All  Forum  Topic

With the motor off or unpluged turn on the tx and rx then put your throttle half way and make sure your servo horns are at a 90 degree angle or right in the middle. Im thinking you can go backwards but not forward because of the elevater servo not centered.

PM  EMAIL  GALLERY  Attn:RR
04-09-2011 06:37 AM  6 years agoPost 3
fung_jeff

rrKey Veteran

Vancouver, BC, Canada

My Posts: All  Forum  Topic

This is a china made coaxial just to let everyone know so no servos. Just two counter rotating sets of course rotating blades ans a motor at the back for forward and backwards flight. So my question is : Does the motor at the back move at all?

Jeffrey Fung...15 Years old - FLEET: Evo 50, Raptor 30, Trex 500, SDX's, X-Spec, Logo 10/400

PM  EMAIL  GALLERY  Attn:RR
04-09-2011 03:22 PM  6 years agoPost 4
willanyone1

rrApprentice

Griffith, IN U.S.

My Posts: All  Forum  Topic

yes that motor should work when wanting to go forward or backward. Im guessing its a 3ch right?

PM  EMAIL  GALLERY  Attn:RR
04-09-2011 05:38 PM  6 years agoPost 5
wifeorheli

rrElite Veteran

reno, nevada usa

My Posts: All  Forum  Topic

Pictures?

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
04-09-2011 08:06 PM  6 years agoPost 6
naplestrapper

rrNovice

naples,fl usa

My Posts: All  Forum  Topic

Yes it is a 3 channel helicopter and there is no servo.and the tail blade does spin clockwise and counter clockwise.it seems there's a slight hesitation between controller and tail blade when I first go forward.it struggles to go forward but backwards no problem when I put the trim down all the way and Hoover it goes backwards by itself of course but trim all the way up still has trouble going forward and trim in the middle hovers great but trouble going forward

PM  EMAIL  GALLERY  Attn:RR
04-09-2011 08:51 PM  6 years agoPost 7
willanyone1

rrApprentice

Griffith, IN U.S.

My Posts: All  Forum  Topic

could be a shorting out wire or just bad motor.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 632 views POST REPLY
Scorpion Power Scorpion Power
HelicopterBeginners Corner › alloy king
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Tuesday, September 26 - 12:00 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online