RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 750 views POST REPLY
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 90 › 90SE and YS91 Throttle Set-up
04-07-2011 09:45 PM  6 years agoPost 1
LS1Heli

rrApprentice

Darien, Illinois

My Posts: All  Forum  Topic

I need some help with this since it is killing me and bringing mounds of frustration.

Here are the details.

90 SE YS91 engine

Hover at 3/4 stick - all pitch has been set.

I am trying to get the atv's to match.

What is throwing me off is the mark on the barrel shown as "40%" in the YS manual. So, do I set my stick to 3/4 hover and make the rods 90* when the barrel is at that mark? Doing this has made my normal throttle curve 10-20-30-40-100.

Or should I do 0-25-50-75-100 and set it at 1/2 stick?

***Since I have a GV-1, all I want to do is make sure that I have the mechanical component set up right!

Help! I have working on this for days!

Raptor 90SE

PM  EMAIL  GALLERY  Attn:RR
04-07-2011 11:21 PM  6 years agoPost 2
Lee O'Dell

rrApprentice

Gibsonville, North Carolina

My Posts: All  Forum  Topic

Set mechanical at 90 degrees and attempt achieve 100 on endpoints regardless of where the hover mark is. This may require experimenting with different servo horns. Use curves to achieve whatever you wish your throttle position to be. Usually 40 IS the hover position for the YS, but also depends greatly on what hover RPM you require.

Hope this helps

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
WATCH
 1 page 750 views POST REPLY
Scorpion Power Scorpion Power
HelicopterThunder TigerRAPTOR 90 › 90SE and YS91 Throttle Set-up
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, September 21 - 10:29 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online