RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 2856 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade mCPX › Blade MCPX with DX7 radio
04-07-2011 07:19 PM  6 years agoPost 1
maveric4

rrVeteran

england

My Posts: All  Forum  Topic

Hi Everyone,

Please could you advise.

In the handbook it lists setup instructions for programing the DX7.

Please can someone confirm what the settings are under the servo reversing part.

Throt
Elev
Gyro
etc

Do these need to be set to normal or do they all have to be reversed.

Sorry I just found that confusing. I figure they all need to be set to normal is this correct.

Thanks

PM  EMAIL  GALLERY  Attn:RR
04-07-2011 07:40 PM  6 years agoPost 2
OLROY

rrKey Veteran

Wichita Ks

My Posts: All  Forum  Topic

There all N=Normal

PM  EMAIL  GALLERY  Attn:RR
04-07-2011 07:51 PM  6 years agoPost 3
mcp_x

rrNovice

NY - USA

My Posts: All  Forum  Topic

Hi
+1 for what olroy said

not sure if this picture will help , but here goes

PM  EMAIL  GALLERY  Attn:RR
04-08-2011 05:55 PM  6 years agoPost 4
pmcderm993

rrNovice

MN

My Posts: All  Forum  Topic

I don't have a swash type of 1 servo 90 degrees on my DX7, but I do have a type of 1 servo normal. I can't get it set correctly.

PM  EMAIL  Attn:RR
04-08-2011 06:03 PM  6 years agoPost 5
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

Just use the 1 servo swash. You don't need 1 servo 90 degree. Chuck

PM  EMAIL  GALLERY  Attn:RR
04-08-2011 06:19 PM  6 years agoPost 6
mcp_x

rrNovice

NY - USA

My Posts: All  Forum  Topic

Hi
on the DX-7 you use 1 servo norm

PM  EMAIL  GALLERY  Attn:RR
04-08-2011 10:40 PM  6 years agoPost 7
pmcderm993

rrNovice

MN

My Posts: All  Forum  Topic

The one servo norm ended up working fine, but I Ended up putting negative 65 exponential on the rudder, because the tail seemed so slow.

PM  EMAIL  Attn:RR
WATCH
 1 page 2856 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Blade
Blade mCPX › Blade MCPX with DX7 radio
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, September 23 - 3:35 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online