RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 430 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Electric Motors-Controllers-ESC
Other › Motor and voltage
04-05-2011 11:42 AM  6 years agoPost 1
l0n3i200n

rrApprentice

South Africa

My Posts: All  Forum  Topic

Hi all electric guru's

I'm planning to run my current motor with a high voltage setup (thinking of 12S setup). I would like to know if the motor would be able to handle the high voltage and what would happen if it can't handle the high voltage( suspected answer is it should burn )

Motor specs
Specifications:
Dimension: 58mm x 49mm, 78mm(with shaft)
Weight: 369g
Kv: 1100rpm/V
Turns: 10T
Voltage: 5~7S
Max Current: 110A
Diameter of shaft: 6mm
Length of front shaft: 21.5mm
ESC: 100~120A

http://www.hobbyking.com/hobbyking/...idProduct=11102

I'm not sure what the watts or timing of this motor is or should be? Could someone maybe answer the esc timing and watts question as well?

PM  EMAIL  Attn:RR
04-05-2011 04:42 PM  6 years agoPost 2
helinutz

rrVeteran

Bournemouth, Dorset, UK

My Posts: All  Forum  Topic

Basically, 12S through that motor would allow it to spin at nearly 50,000 rpm.
I dont think there are many motors out there rated for more than 35,000 rpm.
mind, it would be pretty awesome while (if) it lasted

>>>>>I'm so broke, I cant even pay attention!<<<<<

PM  EMAIL  GALLERY  Attn:RR
04-05-2011 08:15 PM  6 years agoPost 3
Pistol Pete

rrProfessor

Seffner, FL

My Posts: All  Forum  Topic

Voltage 5~7S = 21V to 29.4V MAX

Voltage X 110Amps = Watts.

Low Timing and PWM between 8 to 12mHz.

Keep an eye on temps for motor and ESC.

~~Enjoying the hobby one flight at a time~~

PM  EMAIL  HOMEPAGE  GALLERY  BLOGAttn:RR
WATCH
 1 page 430 views POST REPLY
Scorpion Power Scorpion Power
Helicopter
e-
Electric Motors-Controllers-ESC
Other › Motor and voltage
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, September 26 - 2:55 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online