RunRyder RC
 26  Topic Subscribe
WATCH
 4 pages [ <<    <     2      3     ( 4 )    >    >> ] 14590 views POST REPLY
ProModeler Scorpion Power
Helicopter
e-
KDS
Other News  News KDS Helis , 550 , 600 , 700 sizes !!
09-07-2011 08:18 PM  5 years agoPost 61
red_z06

rrProfessor

Dumont, NJ

My Posts: All  Forum  Topic

Do they have problems with re-engeneered things?
I find that most Chinese companies consider modification a taboo. Perhaps they think it has to do with the designer inadequacy.

What I've experienced is that whatever they produce as a prototype, they tend to push it through as a production unless it simply will not work period.

I truly hope that KDS is willing to tweak minor details.

Currently I am using Trex700 boom support rods with the KDS ball heat staked into the stock boom support rod ends.

www.JustinJee.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
09-12-2011 09:36 PM  5 years agoPost 62
ssrobzoom

Key Veteran

Tn

My Posts: All  Forum  Topic

Kaos frames

Who was making the Kaos Frames? I know Heli Direct was importing them but who's making them?

PM  EMAIL  GALLERY  Attn:RR
09-12-2011 09:38 PM  5 years agoPost 63
darkfa8

Elite Veteran

Brick, NJ - USA

My Posts: All  Forum  Topic

helidirect has more Kaos frames on order. They are in now way related to the KDS brand of products and are made at a different factory.

- Dan Goldstein
Team Revolectrix

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
10-14-2011 05:12 PM  5 years agoPost 64
KDSstaff

Heliman

China

My Posts: All  Forum  Topic

Parts are going to be ordered thru the Kds USA dealers. we are working to get more on the market. In order to stop the misconception of the KDS helicopters.

PM  EMAIL  Attn:RR
11-02-2011 08:46 PM  5 years agoPost 65
red_z06

rrProfessor

Dumont, NJ

My Posts: All  Forum  Topic

In order to stop the misconception of the KDS helicopters.
What misconception?

www.JustinJee.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
11-03-2011 06:27 PM  5 years agoPost 66
roland 44

Heliman

Cottbus, Germany

My Posts: All  Forum  Topic

Now the KDS EBAR is also available in Germany. (The KDS Flymentor is not available in my country because of problems with helicommand-company, I thougt there where similar problems with the KDS EBAR).
Next time we also get the KDS Innova as packgage with the EBAR and KDS Servos, helifan promised.
This is one of only 3 or 4 shops in Germany selling KDS seriosly.

Regards Roland

PM  EMAIL  Attn:RR
11-10-2011 08:42 PM  5 years agoPost 67
esmoglo

Key Veteran

Florida USA

My Posts: All  Forum  Topic

Any idea if these kits will be offerd in the US?

Ugly can be fixed stupid is forever!

PM  EMAIL  GALLERY  Attn:RR
11-10-2011 08:46 PM  5 years agoPost 68
darkfa8

Elite Veteran

Brick, NJ - USA

My Posts: All  Forum  Topic

yes they will, contact RR member cmsilvoy for further info

- Dan Goldstein
Team Revolectrix

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
11-15-2011 01:36 AM  5 years agoPost 69
bwoollia

Heliman

Courtenay, BC Canada

My Posts: All  Forum  Topic

I just ordered and received my KDS 600E FBL from SN Hobbies in BC. The kit looks great, comes with a 500kv motor for 12S, a 120A HV ESC that appears to be a re-branded HobbyWing Pentium, 8A BEC, KDS servos all around and the E-Bar. Quality looks great, I'll report back soon!

They all crash eventually...

PM  EMAIL  HOMEPAGE  Attn:RR
11-15-2011 02:06 AM  5 years agoPost 70
mglenn310

Senior Heliman

west Tx

My Posts: All  Forum  Topic

Got my innova 700 today will finish up tomarow and test fly will get back to you.... Looking good thou

PM  EMAIL  GALLERY  Attn:RR
11-15-2011 02:10 AM  5 years agoPost 71
red_z06

rrProfessor

Dumont, NJ

My Posts: All  Forum  Topic

Got my innova 700 today will finish up tomarow and test fly will get back to you.... Looking good thou
You should order a set of boom support struts for Trex700 to replace the stock. See if you can locate the old set that has the set screw inside as that is easy to rotate one end 90deg.

http://www.quickuk.eu/products/314/...ys_r6t-051.html

Above will work well too.

www.JustinJee.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
11-16-2011 01:42 AM  5 years agoPost 72
mglenn310

Senior Heliman

west Tx

My Posts: All  Forum  Topic

PM  EMAIL  GALLERY  Attn:RR
11-18-2011 04:45 AM  5 years agoPost 73
carbonrex700

Senior Heliman

boardman OH

My Posts: All  Forum  Topic

sweet !! how much cost youre innova 700 ????? you are in the states ????

PM  EMAIL  GALLERY  Attn:RR
11-18-2011 04:49 AM  5 years agoPost 74
mglenn310

Senior Heliman

west Tx

My Posts: All  Forum  Topic

yes im in the states and was less then the trex 700e but you dont get a motor or ESC with it in the kit as KDS dose not sell them this way anymore

PM  EMAIL  GALLERY  Attn:RR
03-16-2012 06:36 PM  5 years agoPost 75
madryan

Heliman

Perth, Australia

My Posts: All  Forum  Topic

KDS Innova

I noticed guys asking where to buy these etc...i spent $3000 USD and bought 3 complete combo kits 1 each of 550/600/700 a bunch of gyro's spare servos and mega parts ...I have a mikado 600 se and nearly all the parts are compatible....the quality of the servos is ..well poor but they're cheap ...motor is ok Speedy out of the box sux and the ebar ...well thats naff too...but the bare bones of the kit is very good...slap n some good servos and electrics and you slap on a logo canopy and no one will tell the difference... you can buy direct from KDS factory as long as you spend a couple thousand or more at once i just got on teh online chat support and asked teh guy f i could buy direct ...he said yeh sure no problem how much will you spend..knowing how they work theyre happy as long as you spend big ... I bought all the stuff just to be able to make a valued opinion... the combo 700 kit only cost about $600 USD with full combo ready to fly just add receiver of your own... I see other retailers selling these retail for around $8-900 USD.... this is only a $600 combo kit and will get an intermediate flyer doing real 3d CHEAP.... I like the kits over all but I have 16 * 600-700 size heli to chose from I am a bit of a heli addict, fun build and actually flies very well ....compare to a mikado vbar head and vbar controller...no comparison...but i refitted the ebar with an align 3gx and it flies as good if not better than my align trex's

If you want to see some of my collection look up heli fleet and look up user name madryan....you will see the KDS 550 i built there...
anyway im a bit off topic but these are good cheap overall and parts are easy to get anywhere...you just have to ask the right people..

Cheers

PM  EMAIL  Attn:RR
03-16-2012 06:47 PM  5 years agoPost 76
madryan

Heliman

Perth, Australia

My Posts: All  Forum  Topic

ANother note about KDS

Incase you guys didn't know...the KDS factory is actually one of China largest RC CNC heli parts manufacturers. The guys there are god to deal with too , they have a new website up and running but still under construction...soon you will be able to log onto it with a user account and buy direct...obviously not at the prices you get if you bulk buy ... I keep in touch with the sales guy i purchased from so he updates me now and then....they don't ever some to do much in hurry...but thats the way they role...they're used to selling thousands or parts to re-sellers.

Anyway hope thats kind of useful to anyone wondering about KDS...I'm a nobody i just got lucky with asking the right person on the right day and made a good contact .

Have fun guys

PM  EMAIL  Attn:RR
04-29-2013 05:41 PM  4 years agoPost 77
TOM Thailand

Heliman

bangkok-th

My Posts: All  Forum  Topic

KDS club Thailand

I want to show you, how about KDS club in Thailand

bud2816bmw@hanmail.ne
bud2816bmw@hanmail.ne
bud2816bmw@hanmail.ne
bud2816bmw@hanmail.ne

PM  EMAIL  GALLERY  Attn:RR
WATCH
 4 pages [ <<    <     2      3     ( 4 )    >    >> ] 14590 views POST REPLY
ProModeler Scorpion Power
Helicopter
e-
KDS
Other News  News KDS Helis , 550 , 600 , 700 sizes !!
 Print TOPIC  Make Suggestion 

 26  Topic Subscribe

Saturday, August 19 - 9:44 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online