RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 430 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › 2.4GHz Binding Question
02-20-2011 12:44 PM  6 years agoPost 1
nheather

rrKey Veteran

Horsham, West​Sussex, UK

My Posts: All  Forum  Topic

Hi,

I don't have 2.4GHz yet but am thinking of upgrading.

I understand that the Tx and Rx must be bound. I think it is also true that you only need to do this manually once - once the binding has been setup, it will be done automatically each time you subsequently turn the system on.

But what if you have multiple receivers. Say you have Rx A and Rx B in different aircraft.

You bind A and fly aircraft A for a few sessions.

You then decide to fly aircarft B. You manually bind it and then fly for a few sessions.

You now come back to aircaft A. Do you have to setup the binding againa or is it just a matter of switching on and flying.

Cheers,

Nigel

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 01:19 PM  6 years agoPost 2
JuanRodriguez

rrProfessor

The Villages,​Florida

My Posts: All  Forum  Topic

It's just a matter of switching off the model you're done flying and switching to the new model you desire to fly......no additional "re-binding" is needed....

Just make sure you select the CORRECT model on your transmitter because with many systems, the transmitter won't do that automatically...

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 01:52 PM  6 years agoPost 3
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Just to clear something up, there's binding and linking.

Binding is the process of making the receiver memorize the GUID (Globally Uniquie ID) of the transmitter. Thats done once (maybe again when you're done setting up a model to set fail safes).

Linking is the process of powering up a system thats already been bound.

Spektrum and JR radios have whats called Model Match where in addition to memorizing the transmitter code it also memorizes the model memory number so that if you have the wrong model selected it wont link up.

Futaba and others do not, the reciever will respond to the transmitter its bound to regardless of the model memory selected.

You can bind any number of recievers to one transmitter, but you can only bind one transmitter to a reciever.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 02:48 PM  6 years agoPost 4
GMPheli

rrElite Veteran

W. Bridgewater, MA​USA

My Posts: All  Forum  Topic

Airtronics SD10-G also has this feature, but only with the 10 channel receiver

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 430 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › 2.4GHz Binding Question
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Friday, November 24 - 9:38 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online