RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 641 views
Scorpion Power Scorpion Power
HelicopterRadio - Spektrum DSM › set dx8 transmitter voltage to high (help)
02-19-2011 05:03 AM  6 years agoPost 1
bec123

rrApprentice

regina, sask. ​canada

My Posts: All  Forum  Topic

Hello all
I was checking things out on the dx8 after downloading 2.1 and set the voltage reading for the tx from 4.3 to 5.6 just to test and see if the alarm works...well it does it vibrates and buzzes and goes into low battery mode and will not let me go in and lower the voltage to 4.3......help any way of fixing this???? I am charging it now and hope it will hit 5.6v long enough to let me re-set....any ideas???? not asking for any thoughts cause I know they will be why do such a dumb thing heeheheh thanks in advance

bec

PM  EMAIL  Attn:RR  Quote
02-19-2011 05:15 AM  6 years agoPost 2
Hellsiege

rrVeteran

Colorado Springs, CO

My Posts: All  Forum  Topic

Might be a dumb sugestion as I don't have a dx8, but what happens if you turn on radio w/out receiver powered on? Can you change setting then? I have a dx3s with telemetry and if temp alarm is on, you can't get into menu's etc... Turning car receiver off and it looses telemetry signal and I can get back into menu. Ground telemetry is different then air, so may not work but worth a shot...

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-19-2011 05:15 AM  6 years agoPost 3
Jason Bell

rrElite Veteran

California

My Posts: All  Forum  Topic

Hook up a 2s lipo to the tx and reset the warning.

AMain.com
Mikado "V Team"
Xnova Motors
Optipower USA
RCProPlus

PM  EMAIL  GALLERY  Attn:RR  Quote
02-19-2011 05:34 AM  6 years agoPost 4
bec123

rrApprentice

regina, sask. ​canada

My Posts: All  Forum  Topic

receiver voltage

thanks for the quick responses,,,

panic is over,,,,,I had the 2s lipo and was going to try it,,,,but I had the reciever charging for about 20-30 min and if you go real fast (took about 3 trys) it will let you go into system setting and reset...I had to plug it back in each time to get a little extra charge...radio showed 5.2v but it let me re-set....the 2s would have done the trick....hellseige thanks also,,,it was the tx that was set to high,,i did not have a reciever on, just playing with the tx and set it to high to operate......all is well now,,,,,i can sleep

bec

it is a great radio....

PM  EMAIL  Attn:RR  Quote
02-19-2011 02:43 PM  6 years agoPost 5
rumbleweed

rrNovice

Maryland=USA

My Posts: All  Forum  Topic

Did you try the clear button?

PM  EMAIL  Attn:RR  Quote
02-20-2011 03:28 AM  6 years agoPost 6
bec123

rrApprentice

regina, sask. ​canada

My Posts: All  Forum  Topic

receiver voltage

hello
I did try the clear button but it did not allow me back into the radio.....I was able to re set it once the battery had a high enough charge in it... I just recommend don't set the tx voltage to 5.6 cause it will buzz you out heheheh until you panic, post, charge and re set..........still like the radio

bec

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 641 views
Scorpion Power Scorpion Power
HelicopterRadio - Spektrum DSM › set dx8 transmitter voltage to high (help)
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, November 24 - 2:55 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online