RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 454 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › ST2 head speed without using aux2 switch
02-18-2011 06:43 PM  6 years agoPost 1
Switch_639

rrApprentice

Port Elizabeth,​South-Africa

My Posts: All  Forum  Topic

hey guys, using a ATGv3 governor... I just can not get it setup without having to flick my aux2 switch to activate ST2 governing mode... normal mode is fine with function switch, ST1 is fine with function switch... but then for ST2 after selecting it on function switch I have to flick Aux2 switch to activate that governor mode...

my governor is currently in normal multimode (2green flashes) and I have reversed my aux2 channel so that my positive atv travel setting is in active multimode (so my normal flight mode is in non governing mode, functioning just as limiter)... negative values will give me normal governing mode in my program mix1...

some pics to give an idea...

the offset -84 value is my ST1 value to give me 1900RPM according to governor, must tach to make sure... the -62 is my ST2, works but only once I switch my aux2 switch... suppose to be 1950RPM... when I change the -100 value it just seems to take over the show and both ST1 and ST2 then equals the same head speed...

I want to be able just to flick my function switch and it has to activate all my head speeds as I have selected them on the governor...

JR-XG8
Trex-600 Nitro
OS 50SX-H + ATGv3
Align DS610's
G770T + DS650

PM  EMAIL  Attn:RR  Quote
02-18-2011 06:52 PM  6 years agoPost 2
george0079

rrElite Veteran

USA

My Posts: All  Forum  Topic

do you have AUX2 assigned to F.MOD in the main setup menu?

Hell... I can fix that.
Uh oh..
Nope.
It's ***ked!!!
RE-KIT!!!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 06:55 PM  6 years agoPost 3
Switch_639

rrApprentice

Port Elizabeth,​South-Africa

My Posts: All  Forum  Topic

no I do not... this could be the problem hey will give it a shot and check it out... also is normal multimode ok? or should I stick to normal governing mode?

edit: awesome thanks! works...

what would happen to my ST1 and ST2 values if I select the governor on normal mode only? not multi normal...

JR-XG8
Trex-600 Nitro
OS 50SX-H + ATGv3
Align DS610's
G770T + DS650

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 454 views
Scorpion Power Scorpion Power
HelicopterRadio - Servo - Gyro - Gov - Batt › ST2 head speed without using aux2 switch
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Sunday, November 19 - 1:26 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online