RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 526 views
Scorpion Power Scorpion Power
02-18-2011 12:49 PM  6 years agoPost 1
Switch_639

rrApprentice

Port Elizabeth,​South-Africa

My Posts: All  Forum  Topic

hey guys... the manual doesn't say much about the modes... what is normal mode? what does active mode mean? which one do I want to be in for governor to function like I programmed it?

JR-XG8
Trex-600 Nitro
OS 50SX-H + ATGv3
Align DS610's
G770T + DS650

PM  EMAIL  Attn:RR  Quote
02-18-2011 01:13 PM  6 years agoPost 2
Scandar

rrApprentice

Santiago-Chile

My Posts: All  Forum  Topic

Hi,

Normal mode it refers to a standar governor, the second mode is active and works like a limiter (you can use mixers and curves).

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 01:20 PM  6 years agoPost 3
Switch_639

rrApprentice

Port Elizabeth,​South-Africa

My Posts: All  Forum  Topic

so normal mode is just like I programmed it the first time without the mix? only having 2 different head speeds? and in active mode I can have 3?

JR-XG8
Trex-600 Nitro
OS 50SX-H + ATGv3
Align DS610's
G770T + DS650

PM  EMAIL  Attn:RR  Quote
02-18-2011 01:56 PM  6 years agoPost 4
Scandar

rrApprentice

Santiago-Chile

My Posts: All  Forum  Topic

In both modes you can have 3 different head speeds, green steady light is normal mode.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 02:06 PM  6 years agoPost 5
Switch_639

rrApprentice

Port Elizabeth,​South-Africa

My Posts: All  Forum  Topic

confused now... whats the difference then? cause I had to setup a mix for idle up1 head speed to work... if I have setup in this manor which mode would I want to be in?

JR-XG8
Trex-600 Nitro
OS 50SX-H + ATGv3
Align DS610's
G770T + DS650

PM  EMAIL  Attn:RR  Quote
02-18-2011 02:29 PM  6 years agoPost 6
Scandar

rrApprentice

Santiago-Chile

My Posts: All  Forum  Topic

Atg has two modes (Normal and Active mode), Normal mode is governor (normal mode refers to a governor mode like futaba gv-1) and Active mode is a limiter (like a AR700R), don´t confuse with head speeds.

In the atg you can see a green steady light? If you see that you are in mormal mode, in this mode you can have 3 head speeds (If you are using a dx7 you can do a mix to have 3 different head speeds, I sent you a pm with the link).

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 02:41 PM  6 years agoPost 7
Switch_639

rrApprentice

Port Elizabeth,​South-Africa

My Posts: All  Forum  Topic

ok from what I gather from your info I want to use governor mode... so I have set it now to normal mode...

final noob question, sorry...

whats the difference between limiter and governor mode?

I have 3mixes setup... I get my rpm flashes when I switch function modes... the led's flash different colours... just in idle up 2 I have to switch AUX2 switch as this activates the high mode atv which is negative... the positive aux2 atv is my normal... and one aux2-aux2 mix for my normal mode also positive value...

JR-XG8
Trex-600 Nitro
OS 50SX-H + ATGv3
Align DS610's
G770T + DS650

PM  EMAIL  Attn:RR  Quote
02-18-2011 02:53 PM  6 years agoPost 8
Scandar

rrApprentice

Santiago-Chile

My Posts: All  Forum  Topic

Yes,

No problem,

Normal mode will make sure the rpm setting stays no matter what the throttle curve and Active throttle mode will use your throttle curves and only limit overspeeding.

You are using a gview to do the setup?.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 02:59 PM  6 years agoPost 9
Switch_639

rrApprentice

Port Elizabeth,​South-Africa

My Posts: All  Forum  Topic

nope... gonna have to tach after this to make sure of the head speed...

JR-XG8
Trex-600 Nitro
OS 50SX-H + ATGv3
Align DS610's
G770T + DS650

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 526 views
Scorpion Power Scorpion Power
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, November 18 - 10:12 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online