RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 662 views
Scorpion Power Scorpion Power
HelicopterSynergy R/CSynergy N9 › N9 swash Rebuild
02-17-2011 09:40 PM  6 years agoPost 1
bmw576

rrKey Veteran

Traverse city MI USA

My Posts: All  Forum  Topic

Has anyone ever rebuilt the N9 swash? It like the swash will come apart.

Team Synergy, Synergy E5, E7, E9, N5c and N7

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 10:26 PM  6 years agoPost 2
thenewguy

rrElite Veteran

Corvallis, Oregon​Where there is​liquid sunshine!

My Posts: All  Forum  Topic

I took a N9 swash apart once. It basically destroyed it. I heated up in the oven but it did not seem to help.

Chris

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 11:02 PM  6 years agoPost 3
bmw576

rrKey Veteran

Traverse city MI USA

My Posts: All  Forum  Topic

I see the keyword in that post ONCE. I didn’t think you could since I haven’t seen replacement parts. I will get a new one on the way. Thanks Chris

Team Synergy, Synergy E5, E7, E9, N5c and N7

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 11:03 PM  6 years agoPost 4
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

I have not tried it on an N9 but Miniature Aircraft used to change swash bearings for 18 bucks. I am sure we could come up with something to rebuild them.

Jeff

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 11:12 PM  6 years agoPost 5
thenewguy

rrElite Veteran

Corvallis, Oregon​Where there is​liquid sunshine!

My Posts: All  Forum  Topic

It can be done with the proper tools. A good Arbor press.

Chris

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 01:26 AM  6 years agoPost 6
Ironhide

rrVeteran

dexter mi us

My Posts: All  Forum  Topic

[quote]It can be done with the proper tools. A good Arbor press.

Well kinda chris , the upper part of the swash is pressed in and flared over . I made the mistake of taking one apart to polish it . I had to loctite it back together . It hasn't moved yet but not really the correct way to do so . I now leave parts like that all together and lube like crazy afterwards . Its a much better process .

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 04:35 PM  6 years agoPost 7
thenewguy

rrElite Veteran

Corvallis, Oregon​Where there is​liquid sunshine!

My Posts: All  Forum  Topic

I agree Ironhide,

I ran into the same issues as you speak of. I never put mine back together.

Thanks,
Chris

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 11:37 PM  6 years agoPost 8
Dan Minick

rrKey Veteran

Columbus, WI

My Posts: All  Forum  Topic

I just did it! I used a light rubber hammer and several sockets that fit tight into the tolerances I needed to take it apart, polished it, then put it back together. I used green loctite to add some confidence but over all the parts fit very well back together.to remake the flange I used an oversized socket on the back of the inner piece. A few taps of the hammer and it looks and feels great. I can upload a pic later when I get back to my computer.Leave it to a farmer.....

PM  EMAIL  GALLERY  Attn:RR  Quote
02-21-2011 12:31 AM  6 years agoPost 9
Dan Minick

rrKey Veteran

Columbus, WI

My Posts: All  Forum  Topic

pics

here it is, you notice all the little milling flaws when you take all that anno off! still looks pretty in the light

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 662 views
Scorpion Power Scorpion Power
HelicopterSynergy R/CSynergy N9 › N9 swash Rebuild
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, November 22 - 5:41 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online