RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 656 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 400 › Logo 400 hardened main rotor shaft
02-17-2011 01:17 AM  6 years agoPost 1
PA Heli-Girl

rrNovice

North Central PA

My Posts: All  Forum  Topic

I purchased a hardened main rotor shaft for my logo 400. Rather than locking it with the stock spring clip placed in a groove on the shaft, it comes with a Jesus pin and plastic hub that is supposed to be screwed to the main gear. I say "supposed" as it obviously requires some type of modification. Does anyone have any pics or solutions? All feedback appreciated

Regards,
Mair
(Frustrated that the normal shaft was "out of stock" and that the hardened shaft deviates from stock condition)

*Flyin' with a purpose*

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 02:56 AM  6 years agoPost 2
mmc205

rrElite Veteran

PA - USA

My Posts: All  Forum  Topic

it doesn't get screwed to the main gear, just put the plastic collar above the pin, slide the shaft through everything form the top, put the pin in and then pull the shaft back towards the top. the pin will fit in the plastic piece and lock everything together. just make sure to re-adjust your zero pitch as this will likely change it a bit.

***Logo 600 vbar***Henseleit TDR vbar***

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 03:03 AM  6 years agoPost 3
PA Heli-Girl

rrNovice

North Central PA

My Posts: All  Forum  Topic

Cool! Thanks mmc205

*Flyin' with a purpose*

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 656 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 400 › Logo 400 hardened main rotor shaft
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, November 20 - 9:42 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online