RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 2007 views
Scorpion Power Scorpion Power
Helicopter
e-
Outrage 200,G5,550,600,700
› scorpion 4035-500 on fusion 50
02-16-2011 12:13 AM  6 years agoPost 1
yannick

rrVeteran

South Korea

My Posts: All  Forum  Topic

Hello guys,

I have a 4035-500 on shelf, would it be suitable for a Fusion 50 in 12s 3000mah? I am looking for 2300 rpm with 620 mm blades FBL?

If yes, what modification would be needed (Pinion, bearing, ect...)?

Thanks

Yannick

Is it me or this time the ground was higher than last time??

PM  EMAIL  Attn:RR  Quote
02-16-2011 03:26 AM  6 years agoPost 2
JohnThompson

rrApprentice

Chesapeake, VA

My Posts: All  Forum  Topic

I used a 4035-560 and only had to do a 6mm support bearing swap. You should have a similar experience. Just order a pinion and fly.

John
Team HeliDirect,
Team KBDD

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-16-2011 04:00 AM  6 years agoPost 3
yannick

rrVeteran

South Korea

My Posts: All  Forum  Topic

what pinion were you using? Is a 500 KV enough to achieve 2300 Rpm in 12S?

Thanks

Is it me or this time the ground was higher than last time??

PM  EMAIL  Attn:RR  Quote
02-16-2011 07:46 AM  6 years agoPost 4
p00rboi

rrNovice

Rockville, VA-USA

My Posts: All  Forum  Topic

500Kv with 16t pinion will get you there on 12s.

PM  EMAIL  Attn:RR  Quote
02-16-2011 08:01 AM  6 years agoPost 5
yannick

rrVeteran

South Korea

My Posts: All  Forum  Topic

Thank you guys,

So the next question is where can I get a FBL fusion (and the bearing and pinion)??

Thanks

Is it me or this time the ground was higher than last time??

PM  EMAIL  Attn:RR  Quote
02-28-2011 01:38 AM  6 years agoPost 6
lowflyer101

rrKey Veteran

garden grove, CA

My Posts: All  Forum  Topic

I use hyperion 4035 500k rebag of scorpion 4035 500, 12s with 16T, CC gov 2200rpm

This motor design for 90 size heli around 4000watts of ass kicking power,over power for 50 heli.

<-freedoom flyer->

PM  EMAIL  GALLERY  Attn:RR  Quote
02-28-2011 02:11 AM  6 years agoPost 7
kazager

rrApprentice

Waldorf, MD - USA

My Posts: All  Forum  Topic

The next batch of Fusions are coming with the 6mm pinion bearing and they will be in on 3/15. Hopefully sooner, like the 1st batch.

Flying $uck$...All of the money out of my bank account!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2011 04:01 PM  6 years agoPost 8
OT45

rrApprentice

Kingston, NY

My Posts: All  Forum  Topic

The next batch of Fusions are coming with the 6mm pinion bearing and they will be in on 3/15. Hopefully sooner, like the 1st batch.
My kit does not have the 6mm bearing block. I believe mine is from the latest shipment.
Can you confirm that this is item is indeed included?

scratch building is not just for planks

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2011 04:10 PM  6 years agoPost 9
kazager

rrApprentice

Waldorf, MD - USA

My Posts: All  Forum  Topic

A 6mm bearing is not included. I was told that Outrage does not currently have a source for the 6mm bearing. I PM'd back and forth with Greg Alderman and couldn't even get an answer as to when more of the 6mm pinion supports would be in stock because he is only the distributor, all I got was "sorry"

Flying $uck$...All of the money out of my bank account!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2011 04:35 PM  6 years agoPost 10
OT45

rrApprentice

Kingston, NY

My Posts: All  Forum  Topic

Thanks for the clarification.

scratch building is not just for planks

PM  EMAIL  GALLERY  Attn:RR  Quote
04-23-2011 03:34 PM  6 years agoPost 11
smizzleablizzle

rrNovice

Long Island

My Posts: All  Forum  Topic

for what it is worth, most recent Fusion 50 kit we got at LHS DID have the 6mm bearing setup.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2007 views
Scorpion Power Scorpion Power
Helicopter
e-
Outrage 200,G5,550,600,700
› scorpion 4035-500 on fusion 50
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, November 21 - 8:03 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online