RunRyder RC
 5  Topic Subscribe
WATCH
 1 page 1270 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Other › DaVinci Turnbuckle Control Arms
02-14-2011 04:43 PM  6 years agoPost 1
WannaBe4D

rrApprentice

AL-A-BAMA

My Posts: All  Forum  Topic

Can someone that is using them let me know how exactly to get the end-link to thread on the "opposite" side? I didn't think the Mikado end-links were threaded, but when I try to turn them in the opposite direction, it seems like they just strip...Thanks in advance!

Most of the time, I can be seen having more ambition than skill.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-14-2011 04:48 PM  6 years agoPost 2
mmc205

rrElite Veteran

PA - USA

My Posts: All  Forum  Topic

you have to screw them in the opposite direction as normal on the "other side" so ccw instead of cw i believe.

***Logo 600 vbar***Henseleit TDR vbar***

PM  EMAIL  GALLERY  Attn:RR  Quote
02-14-2011 05:09 PM  6 years agoPost 3
WannaBe4D

rrApprentice

AL-A-BAMA

My Posts: All  Forum  Topic

I know that, just for some reason it seems like it won't go and it just pulls the thread out of the end-link...

Most of the time, I can be seen having more ambition than skill.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-14-2011 05:42 PM  6 years agoPost 4
Anthony.L

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

I'm running the DaVinci links on my 500SE. They threaded in just fine, make sure you are going the right direction. On the center of the link there is a very small dimple that shows you which side is left hand (reverse) threaded.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-09-2011 09:27 PM  6 years agoPost 5
Skered53

rrNovice

Yamhill, OR USA

My Posts: All  Forum  Topic

Davinchi website only list 600 & 700 size

in 44, 56, 72 and 87 lengths

PM  EMAIL  Attn:RR  Quote
04-10-2011 08:44 AM  6 years agoPost 6
B3lucky

rrNovice

San Francisco, CA

My Posts: All  Forum  Topic

I had the same problem with mine, I ended up heating the threads on the side that I was having trouble with and it helped melt the plastic a bit to let me get it started. I let it cool and threaded in no problem.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2011 09:54 PM  6 years agoPost 7
Skered53

rrNovice

Yamhill, OR USA

My Posts: All  Forum  Topic

so will the 600 size thread into 500 size ends ? and if so, what length do I need for a 500FBL ? ( I don't have it yet, sould be here Thursday)

PM  EMAIL  Attn:RR  Quote
04-10-2011 10:51 PM  6 years agoPost 8
MrNiceGuy

rrVeteran

Melbourne, FL

My Posts: All  Forum  Topic

I am using them with my Logo 10 which uses the same diameter links as the 500 and they are the correct size.

Yesterday is History, Tomorrow is a Mystery, Today is a GIFT

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1270 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Other › DaVinci Turnbuckle Control Arms
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Saturday, November 25 - 11:41 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online