RunRyder RC
 31  Topic Subscribe
WATCH
 7 pages [ <<    <     3      4     ( 5 )     6      7     NEXT    >> ] 13194 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › NEWS! - VBar 5.1 Pro
02-16-2011 04:19 PM  6 years agoPost 81
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Right click on the VBar icon, and add "-l en" without the quotes to the target

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 03:12 PM  6 years agoPost 82
heliguy273

rrNovice

Arvada Colorado

My Posts: All  Forum  Topic

vbar/spectrum AR7000 RX GOV hook up

I would like to use a AR7000 rx with my blue vbar (patch cables used)
Any one know what channels go where to get the governor to work?
3 servo ccpm being used on heli.
Any help would be appreciated.
Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 03:15 PM  6 years agoPost 83
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Check out the videos here;
http://heli.dacsa.net/MrMelSite/VBar101.htm

Especially in the nitro video, the last 4 minutes cover separate receiver hookup.

I might do another video to go step by step programming in the radio as it confuses many.
(it's not that hard, when you get it you will say "ahh, of course"

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 04:01 PM  6 years agoPost 84
ChristianM

rrVeteran

Oslo, Norway

My Posts: All  Forum  Topic

I would like to use a AR7000 rx with my blue vbar (patch cables used)
It begs the question: Why????

Why not use only the satellite receivers and save space, clutter and weight?

Christian

Burn fuel, be happy

PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2011 04:12 PM  6 years agoPost 85
rilopez825

rrVeteran

Pembroke Pines, FL

My Posts: All  Forum  Topic

Agree with ChristianM. Its a cleaner setup lesss hardware on the heli.

Richard

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2011 02:53 AM  6 years agoPost 86
heliguy273

rrNovice

Arvada Colorado

My Posts: All  Forum  Topic

vbar-gov with regular RX

Like using regular rx because of previous satelite rx cable connector problems. Strictly my preference guys

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 04:30 AM  6 years agoPost 87
helitroll

rrVeteran

Southlake, TX

My Posts: All  Forum  Topic

Download failed

I have upgraded from 4 to 5.0 without problems. I used the online update and it failed. Unit not operational. Now it will not connect with any version. Is there a fix? Or send it back.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 04:33 AM  6 years agoPost 88
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Contact Uli on the Vstabi.de forum.

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 04:56 AM  6 years agoPost 89
helitroll

rrVeteran

Southlake, TX

My Posts: All  Forum  Topic

Fixed.

Found the answer on v-bar forum. http://www.vstabi.info/en/node/397
The bottom of the page has a link to a hardware file. It allows you to connect so I could download the file. My original download failure was most likely a voltage issue. I used a different flight pack with no issues. Love the forum.

Thanks laughingstill.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 04:59 AM  6 years agoPost 90
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

I am glad you got it fixed

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 06:11 AM  6 years agoPost 91
HUTCH964

rrKey Veteran

Taylor,Texas 76574​local airport T74

My Posts: All  Forum  Topic

MrMel
Sorry if this sounds goofy I've been out of heli's for a few years and have been reading up on the gov/setting for electric and fuel.
What happened too the optical sensors and their use with Vbar 5.1 ?
Would it be more of a latency issue or just plane BULKY.?

.

Tim

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 12:45 PM  6 years agoPost 92
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Optical sensor (in my experience) was not even good enough for datalogging, so I doubt they are something I would rely on for the governor.

Then it's easier to mount a magnet and use magnet sensor, works in all environments.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 07:19 PM  6 years agoPost 93
KevinB

rrKey Veteran

Saskatoon,​Saskatchewan, Canada

My Posts: All  Forum  Topic

Hello.

I just finished converting my Fury Extreme to Vbar 5.1. I had a GV-1 governor on it before the conversion so I just left that sensor on. One question I have....

With my Vibe50 and a spektrum crankshaft pickup, the magnet light comes on as the crank comes around as expected. With the GV-1 sensor on the Fury, the magnet light is on all the time and goes OFF as the magnet passes by. Will this still sense the rotations properly? The GV-1 sensor was said to work by the beta testers. I just want to confirm.

Thanks!

KevinB

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 07:20 PM  6 years agoPost 94
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Yes, it's "reversed" but will work.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 07:54 PM  6 years agoPost 95
knightofcarnage

rrElite Veteran

chicago

My Posts: All  Forum  Topic

Mrmel, in the nitro video you said. "if you are using 2 magnets divid the gear ratio by 2". You only ment this if both magnets are facing the same way and trigger a pulse. Right? You always have 2 magnets for balancing purposes, but opposite poles (at least with the governors i set up).

PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2011 07:58 PM  6 years agoPost 96
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

yes, only if its two active magnet (small popup text actually pops up saying this), if you use 2 magnets for balancing purposes where one is the only "active" then its ONE magnet.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
02-21-2011 12:42 AM  6 years agoPost 97
JeremyF

rrNovice

Australia

My Posts: All  Forum  Topic

vbar gov!

hey can anyone tell me what could be the reason when i spool the heli up it goes to a high rpm and then when come up to hover the heli come back down to the correct rpm setting that i set in the gov headspeed menu on the vbar software. what curves in the radio that i should be using and do the endpoints in the vbar software in gov 2 tab have to be 100/100 for high and low point?

cheers

Jeremy

PM  EMAIL  GALLERY  Attn:RR  Quote
02-21-2011 03:05 AM  6 years agoPost 98
heliguy273

rrNovice

Arvada Colorado

My Posts: All  Forum  Topic

spectrum digital center w/ 2 sat's

haven't seen this term with vbar before.
What is the definition or purpose?
Also I set my gov on the DX7 aux/gear switch.
in normal I have regular throttle operation.
If I switch to gov mode the servo slowly operate as looking
for the target rpm. If I switch back to normal there seems to
a delay getting the throttle bavk to normal. Is this normal?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2011 01:00 AM  6 years agoPost 99
helicraze

rrElite Veteran

Victoria - Australia

My Posts: All  Forum  Topic

Yes what is the spektrum digital centre?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2011 01:10 AM  6 years agoPost 100
HiroboFreak

rrVeteran

Central Coast, NSW,​Australia

My Posts: All  Forum  Topic

Transmitter calibration will be closer to centre.
I have 0 subtrim & end points at 104/104

It affects the throws also (in a good way)

From software:
The center settings are according to the digital signal output for best precision. For usage, clear all the subtrims in the Tx.
Also addresses as small issue related to throttle trim.

T-rex700n VBar 5.3 Pro | T-rex700e DFC VBar 5.3 Pro | JR DSX9
Team RCBits | Team Lynx

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 7 pages [ <<    <     3      4     ( 5 )     6      7     NEXT    >> ] 13194 views
Scorpion Power Scorpion Power
HelicopterFlybarless Rotor Head SystemsV-Bar › NEWS! - VBar 5.1 Pro
 Print TOPIC  Make Suggestion 

 31  Topic Subscribe

Thursday, November 23 - 1:17 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online