RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1360 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBeastX › Microbeast / AR7100R Setup with HV Cyclic Servos / Rev Limiter
01-16-2011 02:57 AM  7 years agoPost 1
KingJoeMack

rrVeteran

New Baltimore, Mi USA

My Posts: All  Forum  Topic

Does anybody have a diagram/ Setup sugestions for the
AR7100R with Microbeast, using the HV for cyclic as well as the Rev Limiter
I have read in numerious posts that HV should not be run thru microbeast.

Fly with scheduled ground contact !

PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2011 03:11 AM  7 years agoPost 2
TT2

rrApprentice

Nakhonsawan Thailand

My Posts: All  Forum  Topic

There have been many discussions on this...and I've tried to read them all. There have been many guys running unregulated with the MicroBeast and having good luck. There are also those who haven't. From what I've read I (and others) have concluded that the problem with feeding the MicroBeast higher voltage is not due to the amount of current the internal buss of the MicroBeast can handle (up to 50A according to the designer). The problem can be blamed on how much current the connectors feeding the MicroBeast can handle.

My MicroBeast isn't here yet so I haven't figured out all of the wiring from the AR7100R that I'll be using...BUT I plan on feeding as many current-carrying leads from the unregulated side of the AR7100R as I can to the MicroBeast. I also plan on routing the power feeding the tail servo from the regulated side of the AR7100R.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2011 03:43 AM  7 years agoPost 3
Paul Woodcock

rrElite Veteran

Dubai - United Arab Emirates

My Posts: All  Forum  Topic

Hi guys

Check this out, it is for the tail servo wiring on a VBar and 7100 Rx:

https://rc.runryder.com/helicopter/t511347p1/

It should be the same on the Microbeast.

Regards
Paul

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1360 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBeastX › Microbeast / AR7100R Setup with HV Cyclic Servos / Rev Limiter
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, April 20 - 12:35 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online