My Posts: All Forum Topic
I have acquired two sets of blades, One sey is 600mm and the other is 550mm. The 600s are Curtis Youngbloods and the 550s are MS Composits. Both of my helis use 4mm blade bolts. The 600 blades have no bushings to acheive 4.00 and the 550s heve a brass bushing to acheive 3mm, If I remove the bushing I'm sure I'll have 4mm. The question is, Is it OK to run these blades without any bushings? In other words Bladebolts in direct contact with carbon fiber blades?
All help will be appreciated;Junkpilot
When you fly JUNK it's hard to tell when you've crashed!