RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 759 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBeastX › Running the beast with the 7100r
01-12-2011 02:22 PM  7 years agoPost 1
nitroburner

rrApprentice

pikeville ky. us

My Posts: All  Forum  Topic

I have been reading that its not a idea to run your cyclic servos on 8v with the X Beast something about in a control loop system (FBL system) that the servos will get hot and wear out very fast.
I use a 7100r rx and really do not with to run a 2s LiFe pack 6.6v or voltage regulator and if any of you guys are running your X Beast with a 7100 can you post a picture or explain why I can't just run the 7100 Rx and beast with a 2 cell LiPo.

OMG how much did i spend................

PM  EMAIL  GALLERY  Attn:RR  Quote
01-12-2011 02:36 PM  7 years agoPost 2
PC12DRVR

rrKey Veteran

USA

My Posts: All  Forum  Topic

I'm running mine at 8V, Microbeast, AR7100R and a 2 cell LiOn at 8.4V as long as you set the correct control frequencies for your servo in the setup menu it should not be a problem, I did not see anywhere in the manual that says its not adviseable.

Theres always going to be a little more load on servos in any flybarless setup, thats one reason you move the output balls on the servo inward to help give the servo more mechanical advantage.

The MB will even measure your servo throws and let you know if the setup is ideal for the the heli you have it installed on, nice feature.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-12-2011 02:39 PM  7 years agoPost 3
merlin3

rrKey Veteran

dayton, ohio

My Posts: All  Forum  Topic

why dont you want to run a life pack.

Justin - Team Horizon, Team Byron
2-700x, Trex 700n, small helis

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-12-2011 02:43 PM  7 years agoPost 4
nitroburner

rrApprentice

pikeville ky. us

My Posts: All  Forum  Topic

So I just didn't understand, Thanks I have been putting off buying the beast because i didn't want to run less then 8v thats what i run on all my other heli's and really like it.

OMG how much did i spend................

PM  EMAIL  GALLERY  Attn:RR  Quote
01-12-2011 02:46 PM  7 years agoPost 5
nitroburner

rrApprentice

pikeville ky. us

My Posts: All  Forum  Topic

I have Hv servos and like the performance.

OMG how much did i spend................

PM  EMAIL  GALLERY  Attn:RR  Quote
02-08-2011 11:57 AM  6 years agoPost 6
nitroburner

rrApprentice

pikeville ky. us

My Posts: All  Forum  Topic

Thanks for the imput,I came up with my own setup with the help of some of you guys.

OMG how much did i spend................

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 759 views POST REPLY
HelicopterFlybarless Rotor Head SystemsBeastX › Running the beast with the 7100r
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, January 20 - 7:17 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online