RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 1407 views
HelicopterRadio - Futaba FASST › Futaba GY611 questions
01-10-2011 08:01 PM  7 years agoPost 1
hotrodcaddy3

rrApprentice

oneida, ny , united states

My Posts: All  Forum  Topic

ok i looked around to see if i can find some answers but i came up with nothing so here is the question.

What servos can be used with the GY611??

s9254 s9253 ds650

any one have any input thanks

I have a chance to score one of a buddy but will have no servo with it.

watch me fly this, don't worry, read the book that came with the heli!!

PM  EMAIL  GALLERY  Attn:RR
01-10-2011 08:13 PM  7 years agoPost 2
The Old Guy

rrVeteran

UK Surrey

My Posts: All  Forum  Topic

9256/9251 and BLS 251 (narrow band 760)

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
01-10-2011 08:17 PM  7 years agoPost 3
TMoore

rrMaster

Cookeville, TN

My Posts: All  Forum  Topic

Technically speaking the 760us servos are the standard but 1520us servos can be used if you go into the setup parameters and change the gyro to the 1520 us pulse center.

TM

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
01-10-2011 08:18 PM  7 years agoPost 4
hotrodcaddy3

rrApprentice

oneida, ny , united states

My Posts: All  Forum  Topic

Looks like i will have to get a servo

watch me fly this, don't worry, read the book that came with the heli!!

PM  EMAIL  GALLERY  Attn:RR
01-10-2011 08:20 PM  7 years agoPost 5
hotrodcaddy3

rrApprentice

oneida, ny , united states

My Posts: All  Forum  Topic

Tmoore

so i can use a ds650?

watch me fly this, don't worry, read the book that came with the heli!!

PM  EMAIL  GALLERY  Attn:RR
01-10-2011 08:27 PM  7 years agoPost 6
TMoore

rrMaster

Cookeville, TN

My Posts: All  Forum  Topic

If you change the parameters.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
01-10-2011 09:40 PM  7 years agoPost 7
Anthony.L

rrElite Veteran

Seattle, WA

My Posts: All  Forum  Topic

Search for the GY611 secret setup/service menu, it allows you to change the default 760us to 1520us for the rudder servo. Be careful in those menus, would not advise you change anything else.

PM  EMAIL  GALLERY  Attn:RR
01-11-2011 11:48 AM  7 years agoPost 8
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

hotrod,

The Futaba GY611 gyro is designed for use with super narrow pulse (760)servos. Futaba recommends their 9265 servo. The 9251 and bs251 servos are also 760 pulse. The 9253 and 9254 are 1520 pulse.

EDIT: TheOldGuy is correct. I miss read my spec sheet DS650 is 1520.

PM  EMAIL  GALLERY  Attn:RR
01-11-2011 12:01 PM  7 years agoPost 9
The Old Guy

rrVeteran

UK Surrey

My Posts: All  Forum  Topic

ch-47c
BeatX have a "servo parameters sheet" and 9256 / 9251 / 251 are the only 760 pulse servos and the DS 650 is 1520 only.????

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
01-11-2011 12:18 PM  7 years agoPost 10
Flying Brian

rrElite Veteran

St. Clairsville, Ohio

My Posts: All  Forum  Topic

The GY701 has a very easy set up procedure to change this function. Just an FYI.

"I just don't Listen" "

PM  EMAIL  GALLERY  Attn:RR
01-11-2011 12:53 PM  7 years agoPost 11
ch-47c

rrElite Veteran

san jose, ca

My Posts: All  Forum  Topic

Edited above. Thanks OldGuy.

PM  EMAIL  GALLERY  Attn:RR
01-11-2011 02:32 PM  7 years agoPost 12
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

With power off, hold down the left + and - buttons together, then power up...the screen will display "bad op"...now push the right pair of buttons together and you'll be able to begin scrolling through the service menu.

Dont break anything

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 1407 views
HelicopterRadio - Futaba FASST › Futaba GY611 questions
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, January 16 - 6:49 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online