RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 444 views
HelicopterThunder TigerOther › I need help???
09-02-2003 03:02 AM  14 years agoPost 1
viper

rrNovice

Brisbane, Qld, Australia

My Posts: All  Forum  Topic

when i was screwing in the Elevator arm into the side frame
the screw snaped, so i ve got half a screw in the frame, how
am i going to get it out?????

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
09-02-2003 03:08 AM  14 years agoPost 2
Al Magaloff

rrMaster

12,199 Posts- Enough Time Wasted. See Ya!

My Posts: All  Forum  Topic

Did it break in the gray colored elevator piece? If so, it would be easier to buy a new one and start over. I don't think any elevator parts screw into the frames.

PM  EMAIL  Attn:RR  Quote
09-02-2003 03:15 AM  14 years agoPost 3
viper

rrNovice

Brisbane, Qld, Australia

My Posts: All  Forum  Topic

no, the m3x22 screw that gos throught the picth arm and
into the frame!

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
09-02-2003 03:22 AM  14 years agoPost 4
Al Magaloff

rrMaster

12,199 Posts- Enough Time Wasted. See Ya!

My Posts: All  Forum  Topic

OK, the pitch arm. You will spend more time than it's worth. By a set of frames, then analyze why it broke. If it is flush with the hole in the frame, or sticking out some, you can try slotting with a Dremel thin wheel, then heat the screw hot with a soldering iron, then unscrew with screwdriver using the slot. The best way to put those screws in, is to first screw the thing in to cut the threads, then remove and add thick CA for the final assembly.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 444 views
HelicopterThunder TigerOther › I need help???
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, December 18 - 8:39 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online