RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 537 views
Scorpion Power Scorpion Power
HelicopterAlignT-REX 600N › Thick wall fuel tubing
10-10-2010 08:10 PM  7 years agoPost 1
datidun

rrKey Veteran

N Ireland

My Posts: All  Forum  Topic

What fuel tubing are you guys running on your 50 size helis,i usually use thick wall tubing inside diameter 2.5mm not much around only 2mm inside diameter,changing to a differant size tubing will mess around with needle settings.

PM  EMAIL  GALLERY  Attn:RR
10-11-2010 06:47 PM  7 years agoPost 2
Zaneman007

rrElite Veteran

Texas - USA

My Posts: All  Forum  Topic

Align is making fuel tubing. I'm converting to that.

Old Guys Rule!

PM  EMAIL  GALLERY  Attn:RR
10-11-2010 07:50 PM  7 years agoPost 3
datidun

rrKey Veteran

N Ireland

My Posts: All  Forum  Topic

What size is it 2.5 mm inside diameter

PM  EMAIL  GALLERY  Attn:RR
10-11-2010 08:03 PM  7 years agoPost 4
vavavoom

rrVeteran

London, England

My Posts: All  Forum  Topic

[quote]
The 0.5mm difference may possibly make a noticable effect on a 90 heli in idle up due to flow restriction. A 50 size should be fine with it.

## Inteligence is knowing a tomato is a fruit...Common sense is not putting it in a fruit salad

PM  EMAIL  Attn:RR
10-11-2010 08:29 PM  7 years agoPost 5
datidun

rrKey Veteran

N Ireland

My Posts: All  Forum  Topic

ok so if i change from 2.5 mm id to 2.00 id i will have to change needle settings eg righer, correct

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 537 views
Scorpion Power Scorpion Power
HelicopterAlignT-REX 600N › Thick wall fuel tubing
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, November 24 - 11:25 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online