RunRyder RC
 5  Topic Subscribe
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1548 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 600 › Logo 600 almost done....final component selection
10-07-2010 02:57 AM  7 years agoPost 21
mmc205

rrElite Veteran

PA - USA

My Posts: All  Forum  Topic

winding mostly effects kv. i'm not going to get into motor theory here, but basically, the number of wraps, thickness of the wire, number of stator poles, stator thickness and some other items affect the kv, io, and efficiency of the motor effect kv. IN the end motorvoltage_under_load*kv*pinion_teeth/main_gear_teeth*0.85=main rotor rpm under heavy load. I find 42.5 volts for 12s for 30C packs under about 100-125 amp loads to be about right. Castle controllers bog more, jive less, but is a good jumping off point, and you can get a pinion larger for castle (they seem generally need a pinion one tooth larger to hold headspeed), or a pinion smaller for the jive.

***Logo 600 vbar***Henseleit TDR vbar***

PM  EMAIL  GALLERY  Attn:RR  Quote
10-10-2010 08:47 PM  7 years agoPost 22
buster1

rrKey Veteran

Manhattan, NY

My Posts: All  Forum  Topic

600se setup

Considering the 600 Se Vbar,

Can anyone recommend the best overall set up for solid to aggressive 3d.

-servos
-blades
-motor/pinion
-ESC
-Batts

Thanks,
Jeff

PM  EMAIL  GALLERY  Attn:RR  Quote
10-10-2010 08:51 PM  7 years agoPost 23
mmc205

rrElite Veteran

PA - USA

My Posts: All  Forum  Topic

bls451
bls251
jive 80 hv (best) or castle 80 hv (good)
12S 4000 30C or better
pyro 700-45 (11T) (best) or scorpion 4020-450 (11T) (good)
edge 693 main
edge 105 tail

***Logo 600 vbar***Henseleit TDR vbar***

PM  EMAIL  GALLERY  Attn:RR  Quote
10-10-2010 08:53 PM  7 years agoPost 24
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

My opinion from what I have seen run on hard​setups

All for 12s setup

-servos BLS 451
-blades Edge 693
-motor/pinion Scorpion 4035-500 or 560
-ESC Jive 80+HV
-Batts TP 45c

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
10-10-2010 08:54 PM  7 years agoPost 25
mmc205

rrElite Veteran

PA - USA

My Posts: All  Forum  Topic

ron, 500kv is a bit high if your running 12S, no? he didn't specify cells count though so maybe is looking to run 10S

***Logo 600 vbar***Henseleit TDR vbar***

PM  EMAIL  GALLERY  Attn:RR  Quote
10-10-2010 09:15 PM  7 years agoPost 26
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

No sir....10 tooth pinion

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2010 08:57 AM  7 years agoPost 27
helinutz

rrVeteran

Bournemouth, Dorset,​UK

My Posts: All  Forum  Topic

10 tooth Mod 1.0 pinions only available for 5mm shaft motors.
You should still be able to get the headspeed you want though using 11 tooth, as the Jive will run happily at a lot lower % setting than other ESC's.

>>>>>I'm so broke, I cant even pay attention!<<<<<

PM  EMAIL  GALLERY  Attn:RR  Quote
10-11-2010 11:31 AM  7 years agoPost 28
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Did not look at that Sorry

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1548 views
Scorpion Power Scorpion Power
Helicopter
e-
Mikado
Logo 600 › Logo 600 almost done....final component selection
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Saturday, November 18 - 3:42 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online