RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 753 views POST REPLY
HelicopterCentury Radikal G20-30 N640 Hawk Predator › Tail Pitch Plate, stock/upgrade Radikal G20 LT
08-13-2010 01:05 AM  7 years agoPost 1
Erderick

rrNovice

Laval,Quebec,canada

My Posts: All  Forum  Topic

well here is my problem i have install the CNC Aluminum Tail Pitch Plate CN2282S but the tail goes left to right before i can lift off , i reinstall the stock tail pitch plate all is well i can hover no prob...as before , i have notice that it is not made exactly like the stock part do i need to readjust the gyro or !!!! any idea why!

PATIENCE IS A VERTUE!

PM  EMAIL  GALLERY  Attn:RR  Quote
08-17-2010 02:32 AM  7 years agoPost 2
Erderick

rrNovice

Laval,Quebec,canada

My Posts: All  Forum  Topic

41 view nobody answer fair well all
its seems like nobody wants to help out cheers !!!!!

PATIENCE IS A VERTUE!

PM  EMAIL  GALLERY  Attn:RR  Quote
08-17-2010 11:53 AM  7 years agoPost 3
Against Gravity

rrVeteran

Pottstown PA

My Posts: All  Forum  Topic

Need more info
If you want help, please give us all the info. what Gyro,Blades and a picture would help.

AG

PM  EMAIL  GALLERY  Attn:RR  Quote
08-17-2010 01:55 PM  7 years agoPost 4
helibreezer

rrApprentice

Patuxent River, MD - USA

My Posts: All  Forum  Topic

Sounds like someone is not living up to their signature! Sometimes you have to wait for an answer. I do not have the CNC upgrade, mainly because the plastic works great, but also because it looks like the same design as the "faulty" original pitch plate with the trailing edge. That for some reason does not agree with the radikal too much. I would call Century and ask if they have heard of this issue, and tell them what is going on, they may just change the design and send you a new one!

what does a dominatrix have in common with a heli? Both beat something into submission!

PM  EMAIL  GALLERY  Attn:RR  Quote
08-18-2010 01:00 AM  7 years agoPost 5
oldfart

rrProfessor

Vancouver, Canada

My Posts: All  Forum  Topic

I will bet that the former pitch plate you had controlled the tail blades from the leading edge. And your new CNC unit did so from theb trailing edge. If you did not reset your gyro and tail servo servo settings, all would have been reversed. This would result in the symptoms you described.

As many of us who may have been able to answer, where busy attending the annual IRCHA Jamboree meca, AND HELPING ANY OF THE Centurians there, we were not available to be here.

Phil

PM  EMAIL  GALLERY  Attn:RR  Quote
08-18-2010 02:12 PM  7 years agoPost 6
Erderick

rrNovice

Laval,Quebec,canada

My Posts: All  Forum  Topic

tail pitch plate
Tks oldfart really appreciated the info will do so and keep you inform

PATIENCE IS A VERTUE!

PM  EMAIL  GALLERY  Attn:RR  Quote
08-20-2010 03:22 AM  7 years agoPost 7
ajcoholic

rrNovice

Timmins, Ontario, Canada

My Posts: All  Forum  Topic

Phil,
I have the same CNC aluminum pitch plate's for both my Radikals and they are the same as the plastic stock unit - ie, use the leading edge for control. I replaced mine and it was just a matter of re setting the gyro's endpoints, as the dimensions are slightly different.

All I did was swap it out, and redo my end points. So thats not it.

AJC

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 753 views POST REPLY
HelicopterCentury Radikal G20-30 N640 Hawk Predator › Tail Pitch Plate, stock/upgrade Radikal G20 LT
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Monday, May 21 - 2:36 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online