RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 512 views
06-06-2010 06:40 PM  7 years agoPost 1
toetapper

rrNovice

uk ...leicestershire

My Posts: All  Forum  Topic

Hi guys after some tips to get the vibe 50 fan hub of my os 50... i have taken off the nut,taken off the carb and locked the crank and it just wont move? i tried twisting it with all my force but no good....help

Si

PM  EMAIL  Attn:RR  Quote
06-06-2010 07:26 PM  7 years agoPost 2
Turkana

rrKey Veteran

Montreal,Quebec , Canada

My Posts: All  Forum  Topic

Well I use a puller and it works great. But if you have a locking tool you should be able to "unscew" the hub. Lock the engine, take a glove or cloth and unscrew the hub like you would unscrew any other nut. yes you need power but it usualy works fine.

Regards Pete

PM  EMAIL  Attn:RR  Quote
06-07-2010 07:44 PM  7 years agoPost 3
behemoth

rrNovice

Gloucestershire - UK

My Posts: All  Forum  Topic

I found the collet is squeezed down on the thread.

When I remove it, I use a 1/4" reamer to open up the inner diameter and use the collet again as it slides on a treat after that.

Dave

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 512 views
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, December 17 - 11:36 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online