RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 556 views POST REPLY
ProModeler Scorpion Power
HelicopterThunder TigerRAPTOR 50 › Mavrik CNC tail case
06-06-2010 06:20 AM  7 years agoPost 1
NZ_Nitro

Veteran

New Zealand

My Posts: All  Forum  Topic

Well pulled the rappy apart to replace the bearings a few months ago...... went to put it back together today and came to a stop the rear tail assembled seems to be missing a couple of spacers on the tail shaft? if you look there is at least 5mm side play (2.5 per side) checked the instructions that came with it and also my parts box from the dismantle.... cant see or find any spacers

PM  EMAIL  Attn:RR
06-06-2010 06:24 AM  7 years agoPost 2
baddynergy

Elite Veteran

sierra madre, ca- usa

My Posts: All  Forum  Topic

You assembled the tail pulley incorrectly. pull it apart and make sure that both beveled side face inwards towards each other. In your pic, flip the right side around.

**Unattended children will be givin a shot of espresso and a puppy**

PM  EMAIL  GALLERY  Attn:RR
06-06-2010 06:26 AM  7 years agoPost 3
NZ_Nitro

Veteran

New Zealand

My Posts: All  Forum  Topic

dam funny

yes you are correct, the side plate did "slip" into the main body, never thought that was wrong thanks for that

PM  EMAIL  Attn:RR
06-06-2010 06:29 AM  7 years agoPost 4
baddynergy

Elite Veteran

sierra madre, ca- usa

My Posts: All  Forum  Topic

No worries. Good thing you caught the play in it before flying it, it causes one heck of a tail wag.. Dont ask how I know

**Unattended children will be givin a shot of espresso and a puppy**

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 556 views POST REPLY
ProModeler Scorpion Power
HelicopterThunder TigerRAPTOR 50 › Mavrik CNC tail case
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, August 22 - 4:04 pm - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online