RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 847 views
HelicopterFlybarless Rotor Head SystemsAlign 3G › Removing the plug from the 3G sensor
06-05-2010 04:54 PM  7 years agoPost 1
allenl

rrApprentice

Petaluma, CA

My Posts: All  Forum  Topic

Hi all,

What's the trick to removing the plug from the sensor? I pulled on it but no go. Once I plugged it in and can't get it back out. No glue or anything was used. Do I have to pull up and out or down and out?

allen

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 05:13 PM  7 years agoPost 2
AzHyper

rrKey Veteran

Peoria, Az.

My Posts: All  Forum  Topic

Hi Allen - just pull the boot back, stick a small screwdriver btw the white socket and the plug, then work your way around. Go slowly and be careful. The white socket is supposed to remain in the unit.

PM  EMAIL  Attn:RR  Quote
06-05-2010 06:46 PM  7 years agoPost 3
ckd

rrApprentice

Saugus CA

My Posts: All  Forum  Topic

You push down slightly on the plug. If you notice the female part is split in half and the male end has two tangs or bumps on the top of the plug that engage when its plugged in.

PM  EMAIL  Attn:RR  Quote
06-05-2010 07:02 PM  7 years agoPost 4
allenl

rrApprentice

Petaluma, CA

My Posts: All  Forum  Topic

Cool. Thanks guys. A little push down and it came right out. I'm getting my 3G link today and I want to get setup for the update.

allen

PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2010 07:29 PM  7 years agoPost 5
trex600esp12s

rrNovice

albert nc

My Posts: All  Forum  Topic

Let us know how it works with the upgrades

T REX 700E 3G T REX 600 3G T REX 500 3G RAVE FBL 6S 3G

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 847 views
HelicopterFlybarless Rotor Head SystemsAlign 3G › Removing the plug from the 3G sensor
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, December 11 - 11:11 am - Copyright © 2000-2017 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online